Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <i...@metux.net>
---
drivers/regulator/Kconfig | 49 +++++++++++++++++++++++------------------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index b7f249e..43f92ed 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -123,9 +123,9 @@ config REGULATOR_AB3100
depends on AB3100_CORE
default y if AB3100_CORE
help
- These regulators correspond to functionality in the
- AB3100 analog baseband dealing with power regulators
- for the system.
+ These regulators correspond to functionality in the
+ AB3100 analog baseband dealing with power regulators
+ for the system.
config REGULATOR_AB8500
bool "ST-Ericsson AB8500 Power Regulators"
@@ -378,15 +378,15 @@ config REGULATOR_LP3971
tristate "National Semiconductors LP3971 PMIC regulator driver"
depends on I2C
help
- Say Y here to support the voltage regulators and convertors
- on National Semiconductors LP3971 PMIC
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3971 PMIC
config REGULATOR_LP3972
tristate "National Semiconductors LP3972 PMIC regulator driver"
depends on I2C
help
- Say Y here to support the voltage regulators and convertors
- on National Semiconductors LP3972 PMIC
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3972 PMIC
config REGULATOR_LP872X
tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
@@ -649,24 +649,24 @@ config REGULATOR_PBIAS
tristate "PBIAS OMAP regulator driver"
depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
help
- Say y here to support pbias regulator for mmc1:SD card i/o
- on OMAP SoCs.
- This driver provides support for OMAP pbias modelled
- regulators.
+ Say y here to support pbias regulator for mmc1:SD card i/o
+ on OMAP SoCs.
+ This driver provides support for OMAP pbias modelled
+ regulators.
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
help
- This driver provides support for the voltage regulators of the
- PCAP2 PMIC.
+ This driver provides support for the voltage regulators of the
+ PCAP2 PMIC.
config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
depends on MFD_PCF50633
help
- Say Y here to support the voltage regulators and converters
- on PCF50633
+ Say Y here to support the voltage regulators and converters
+ on PCF50633
config REGULATOR_PFUZE100
tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
@@ -789,25 +789,25 @@ config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
depends on MFD_SEC_CORE
help
- This driver controls Samsung S2MPA01 voltage output regulator
- via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
+ This driver controls Samsung S2MPA01 voltage output regulator
+ via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
depends on MFD_SEC_CORE
help
- This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
- output regulator via I2C bus. The chip is comprised of high efficient
- Buck converters including Dual-Phase Buck converter, Buck-Boost
- converter, various LDOs.
+ This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
+ output regulator via I2C bus. The chip is comprised of high efficient
+ Buck converters including Dual-Phase Buck converter, Buck-Boost
+ converter, various LDOs.
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
depends on MFD_SEC_CORE
help
- This driver supports a Samsung S5M8767A voltage output regulator
- via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
- supports DVS mode with 8bits of output voltage control.
+ This driver supports a Samsung S5M8767A voltage output regulator
+ via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
+ supports DVS mode with 8bits of output voltage control.
config REGULATOR_SC2731
tristate "Spreadtrum SC2731 power regulator driver"
@@ -1058,4 +1058,3 @@ config REGULATOR_WM8994
WM8994 CODEC.
endif
-
--
1.9.1
