Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <i...@metux.net>
---
drivers/gpio/Kconfig | 50 +++++++++++++++++++++++++-------------------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3f50526..c5420e6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -27,12 +27,12 @@ config GPIOLIB_FASTPATH_LIMIT
range 32 512
default 512
help
- This adjusts the point at which certain APIs will switch from
- using a stack allocated buffer to a dynamically allocated buffer.
+ This adjusts the point at which certain APIs will switch from
+ using a stack allocated buffer to a dynamically allocated buffer.
- You shouldn't need to change this unless you really need to
- optimize either stack space or performance. Change this carefully
- since setting an incorrect value could cause stack corruption.
+ You shouldn't need to change this unless you really need to
+ optimize either stack space or performance. Change this carefully
+ since setting an incorrect value could cause stack corruption.
config OF_GPIO
def_bool y
@@ -320,7 +320,7 @@ config GPIO_MENZ127
depends on MCB
select GPIO_GENERIC
help
- Say yes here to support the MEN 16Z127 GPIO Controller
+ Say yes here to support the MEN 16Z127 GPIO Controller
config GPIO_MM_LANTIQ
bool "Lantiq Memory mapped GPIOs"
@@ -862,11 +862,11 @@ config GPIO_MAX732X
Input and Output (designed by 'P'). The combinations are listed
below:
- 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
- max7322 (4I4O), max7323 (4P4O)
+ 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
+ max7322 (4I4O), max7323 (4P4O)
- 16 bits: max7324 (8I8O), max7325 (8P8O),
- max7326 (4I12O), max7327 (4P12O)
+ 16 bits: max7324 (8I8O), max7325 (8P8O),
+ max7326 (4I12O), max7327 (4P12O)
Board setup code must specify the model to use, and the start
number for these GPIOs.
@@ -893,17 +893,17 @@ config GPIO_PCA953X
SMBus I/O expanders, made mostly by NXP or TI. Compatible
models include:
- 4 bits: pca9536, pca9537
+ 4 bits: pca9536, pca9537
- 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
- pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
+ 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
+ pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
- 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
- tca6416
+ 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
+ tca6416
- 24 bits: tca6424
+ 24 bits: tca6424
- 40 bits: pca9505, pca9698
+ 40 bits: pca9505, pca9698
config GPIO_PCA953X_IRQ
bool "Interrupt controller support for PCA953x"
@@ -925,7 +925,7 @@ config GPIO_PCF857X
8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
pca9670, pca9672, pca9674, pca9674a,
- max7328, max7329
+ max7328, max7329
16 bits: pcf8575, pcf8575c, pca8575,
pca9671, pca9673, pca9675
@@ -1047,9 +1047,9 @@ config HTC_EGPIO
bool "HTC EGPIO support"
depends on GPIOLIB && ARM
help
- This driver supports the CPLD egpio chip present on
- several HTC phones. It provides basic support for input
- pins, output pins, and irqs.
+ This driver supports the CPLD egpio chip present on
+ several HTC phones. It provides basic support for input
+ pins, output pins, and irqs.
config GPIO_JANZ_TTL
tristate "Janz VMOD-TTL Digital IO Module"
@@ -1085,7 +1085,7 @@ config GPIO_LP873X
on LP873X PMICs.
This driver can also be built as a module. If so, the module will be
- called gpio-lp873x.
+ called gpio-lp873x.
config GPIO_LP87565
tristate "TI LP87565 GPIO"
@@ -1436,9 +1436,9 @@ config GPIO_VIPERBOARD
Say yes here to access the GPIO signals of Nano River
Technologies Viperboard. There are two GPIO chips on the
board: gpioa and gpiob.
- See viperboard API specification and Nano
- River Tech's viperboard.h for detailed meaning
- of the module parameters.
+ See viperboard API specification and Nano
+ River Tech's viperboard.h for detailed meaning
+ of the module parameters.
endmenu
--
1.9.1
