On Mon, 2019-03-11 at 14:56 +0100, Enrico Weigelt, metux IT consult wrote: > Formatting of Kconfig files doesn't look so pretty, so let the > Great White Handkerchief come around and clean it up. > > Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]> > --- > arch/arm/Kconfig | 24 +++++++++++----------- > arch/arm/mach-aspeed/Kconfig | 10 ++++----- > arch/arm/mach-ep93xx/Kconfig | 8 ++++---- > arch/arm/mach-hisi/Kconfig | 14 ++++++------- > arch/arm/mach-ixp4xx/Kconfig | 32 ++++++++++++++--------------- > arch/arm/mach-mmp/Kconfig | 2 +- > arch/arm/mach-omap1/Kconfig | 36 ++++++++++++++++---------------- > arch/arm/mach-omap2/Kconfig | 12 +++++------ > arch/arm/mach-prima2/Kconfig | 6 +++--- > arch/arm/mach-s3c24xx/Kconfig | 32 ++++++++++++++--------------- > arch/arm/mach-s3c64xx/Kconfig | 16 +++++++-------- > arch/arm/mach-sa1100/Kconfig | 4 ++-- > arch/arm/mach-vt8500/Kconfig | 6 +++--- > arch/arm/mach-w90x900/Kconfig | 6 +++--- > arch/arm/mm/Kconfig | 48 > +++++++++++++++++++++---------------------- > arch/arm/plat-samsung/Kconfig | 26 +++++++++++------------ > 16 files changed, 140 insertions(+), 142 deletions(-)
Acked-by: Lubomir Rintel <[email protected]> (mach-mmp) Thanks Lubo > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 5085a1e..c89f683 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -1115,14 +1115,14 @@ config ARM_ERRATA_764369 > in the diagnostic control register of the SCU. > > config ARM_ERRATA_775420 > - bool "ARM errata: A data cache maintenance operation which aborts, > might lead to deadlock" > - depends on CPU_V7 > - help > - This option enables the workaround for the 775420 Cortex-A9 (r2p2, > - r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance > - operation aborts with MMU exception, it might cause the processor > - to deadlock. This workaround puts DSB before executing ISB if > - an abort may occur on cache maintenance. > + bool "ARM errata: A data cache maintenance operation which aborts, > might lead to deadlock" > + depends on CPU_V7 > + help > + This option enables the workaround for the 775420 Cortex-A9 (r2p2, > + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance > + operation aborts with MMU exception, it might cause the processor > + to deadlock. This workaround puts DSB before executing ISB if > + an abort may occur on cache maintenance. > > config ARM_ERRATA_798181 > bool "ARM errata: TLBI/DSB failure on Cortex-A15" > @@ -1650,12 +1650,12 @@ config HW_PERF_EVENTS > depends on ARM_PMU > > config SYS_SUPPORTS_HUGETLBFS > - def_bool y > - depends on ARM_LPAE > + def_bool y > + depends on ARM_LPAE > > config HAVE_ARCH_TRANSPARENT_HUGEPAGE > - def_bool y > - depends on ARM_LPAE > + def_bool y > + depends on ARM_LPAE > > config ARCH_WANT_GENERAL_HUGETLB > def_bool y > diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig > index 2d5570e..f6eaf05 100644 > --- a/arch/arm/mach-aspeed/Kconfig > +++ b/arch/arm/mach-aspeed/Kconfig > @@ -18,9 +18,9 @@ config MACH_ASPEED_G4 > select CPU_ARM926T > select PINCTRL_ASPEED_G4 > help > - Say yes if you intend to run on an Aspeed ast2400 or similar > - fourth generation BMCs, such as those used by OpenPower Power8 > - systems. > + Say yes if you intend to run on an Aspeed ast2400 or similar > + fourth generation BMCs, such as those used by OpenPower Power8 > + systems. > > config MACH_ASPEED_G5 > bool "Aspeed SoC 5th Generation" > @@ -28,7 +28,7 @@ config MACH_ASPEED_G5 > select CPU_V6 > select PINCTRL_ASPEED_G5 > help > - Say yes if you intend to run on an Aspeed ast2500 or similar > - fifth generation Aspeed BMCs. > + Say yes if you intend to run on an Aspeed ast2500 or similar > + fifth generation Aspeed BMCs. > > endif > diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig > index c095236..597ea24 100644 > --- a/arch/arm/mach-ep93xx/Kconfig > +++ b/arch/arm/mach-ep93xx/Kconfig > @@ -125,10 +125,10 @@ config MACH_MICRO9S > Contec Micro9-Slim board. > > config MACH_SIM_ONE > - bool "Support Simplemachines Sim.One board" > - help > - Say 'Y' here if you want your kernel to support the > - Simplemachines Sim.One board. > + bool "Support Simplemachines Sim.One board" > + help > + Say 'Y' here if you want your kernel to support the > + Simplemachines Sim.One board. > > config MACH_SNAPPER_CL15 > bool "Support Bluewater Systems Snapper CL15 Module" > diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig > index 65a048f..4850f8b 100644 > --- a/arch/arm/mach-hisi/Kconfig > +++ b/arch/arm/mach-hisi/Kconfig > @@ -24,13 +24,13 @@ config ARCH_HI3xxx > Support for Hisilicon Hi36xx SoC family > > config ARCH_HIP01 > - bool "Hisilicon HIP01 family" > - depends on ARCH_MULTI_V7 > - select HAVE_ARM_SCU if SMP > - select HAVE_ARM_TWD if SMP > - select ARM_GLOBAL_TIMER > - help > - Support for Hisilicon HIP01 SoC family > + bool "Hisilicon HIP01 family" > + depends on ARCH_MULTI_V7 > + select HAVE_ARM_SCU if SMP > + select HAVE_ARM_TWD if SMP > + select ARM_GLOBAL_TIMER > + help > + Support for Hisilicon HIP01 SoC family > > config ARCH_HIP04 > bool "Hisilicon HiP04 Cortex A15 family" > diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig > index fea00812..7b47a3c 100644 > --- a/arch/arm/mach-ixp4xx/Kconfig > +++ b/arch/arm/mach-ixp4xx/Kconfig > @@ -22,9 +22,9 @@ config MACH_AVILA > see <file:Documentation/arm/IXP4xx>. > > config MACH_LOFT > - bool "Loft" > - depends on MACH_AVILA > - help > + bool "Loft" > + depends on MACH_AVILA > + help > Say 'Y' here if you want your kernel to support the Giant > Shoulder Inc Loft board (a minor variation on the standard > Gateworks Avila Network Platform). > @@ -33,7 +33,7 @@ config ARCH_ADI_COYOTE > bool "Coyote" > select FORCE_PCI > help > - Say 'Y' here if you want your kernel to support the ADI > + Say 'Y' here if you want your kernel to support the ADI > Engineering Coyote Gateway Reference Platform. For more > information on this platform, see <file:Documentation/arm/IXP4xx>. > > @@ -56,8 +56,8 @@ config MACH_WG302V2 > config ARCH_IXDP425 > bool "IXDP425" > help > - Say 'Y' here if you want your kernel to support Intel's > - IXDP425 Development Platform (Also known as Richfield). > + Say 'Y' here if you want your kernel to support Intel's > + IXDP425 Development Platform (Also known as Richfield). > For more information on this platform, see > <file:Documentation/arm/IXP4xx>. > > config MACH_IXDPG425 > @@ -88,12 +88,12 @@ config MACH_KIXRP435 > For more information on this platform, see > <file:Documentation/arm/IXP4xx>. > > # > -# IXCDP1100 is the exact same HW as IXDP425, but with a different machine > -# number from the bootloader due to marketing monkeys, so we just enable it > +# IXCDP1100 is the exact same HW as IXDP425, but with a different machine > +# number from the bootloader due to marketing monkeys, so we just enable it > # by default if IXDP425 is enabled. > # > config ARCH_IXCDP1100 > - bool > + bool > depends on ARCH_IXDP425 > default y > > @@ -200,14 +200,14 @@ config IXP4XX_INDIRECT_PCI > bool "Use indirect PCI memory access" > depends on PCI > help > - IXP4xx provides two methods of accessing PCI memory space: > + IXP4xx provides two methods of accessing PCI memory space: > > - 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). > - To access PCI via this space, we simply ioremap() the BAR > - into the kernel and we can use the standard read[bwl]/write[bwl] > - macros. This is the preferred method due to speed but it > - limits the system to just 64MB of PCI memory. This can be > - problematic if using video cards and other memory-heavy devices. > + 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). > + To access PCI via this space, we simply ioremap() the BAR > + into the kernel and we can use the standard read[bwl]/write[bwl] > + macros. This is the preferred method due to speed but it > + limits the system to just 64MB of PCI memory. This can be > + problematic if using video cards and other memory-heavy devices. > > 2) If > 64MB of memory space is required, the IXP4xx can be > configured to use indirect registers to access the whole PCI > diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig > index 94500be..144036e 100644 > --- a/arch/arm/mach-mmp/Kconfig > +++ b/arch/arm/mach-mmp/Kconfig > @@ -149,7 +149,7 @@ config CPU_MMP2 > Select code specific to MMP2. MMP2 is ARMv7 compatible. > > config USB_EHCI_MV_U2O > - bool "EHCI support for PXA USB OTG controller" > + bool "EHCI support for PXA USB OTG controller" > depends on USB_EHCI_MV > help > Enables support for OTG controller which can be switched to host mode. > diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig > index c4694f2..2e7d733 100644 > --- a/arch/arm/mach-omap1/Kconfig > +++ b/arch/arm/mach-omap1/Kconfig > @@ -55,7 +55,7 @@ config OMAP_MUX_WARNINGS > default y > help > Choose Y here to warn whenever driver initialization logic needs > - to change the pin multiplexing setup. When there are no warnings > + to change the pin multiplexing setup. When there are no warnings > printed, it's safe to deselect OMAP_MUX for your product. > > comment "OMAP Board Type" > @@ -65,20 +65,20 @@ config MACH_OMAP_INNOVATOR > bool "TI Innovator" > depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) > help > - TI OMAP 1510 or 1610 Innovator board support. Say Y here if you > - have such a board. > + TI OMAP 1510 or 1610 Innovator board support. Say Y here if you > + have such a board. > > config MACH_OMAP_H2 > bool "TI H2 Support" > depends on ARCH_OMAP1 && ARCH_OMAP16XX > - help > + help > TI OMAP 1610/1611B H2 board support. Say Y here if you have such > a board. > > config MACH_OMAP_H3 > bool "TI H3 Support" > depends on ARCH_OMAP1 && ARCH_OMAP16XX > - help > + help > TI OMAP 1710 H3 board support. Say Y here if you have such > a board. > > @@ -91,14 +91,14 @@ config MACH_HERALD > config MACH_OMAP_OSK > bool "TI OSK Support" > depends on ARCH_OMAP1 && ARCH_OMAP16XX > - help > + help > TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here > - if you have such a board. > + if you have such a board. > > config OMAP_OSK_MISTRAL > bool "Mistral QVGA board Support" > depends on MACH_OMAP_OSK > - help > + help > The OSK supports an optional add-on board with a Quarter-VGA > touchscreen, PDA-ish buttons, a resume button, bicolor LED, > and camera connector. Say Y here if you have this board. > @@ -106,14 +106,14 @@ config OMAP_OSK_MISTRAL > config MACH_OMAP_PERSEUS2 > bool "TI Perseus2" > depends on ARCH_OMAP1 && ARCH_OMAP730 > - help > + help > Support for TI OMAP 730 Perseus2 board. Say Y here if you have such > a board. > > config MACH_OMAP_FSAMPLE > bool "TI F-Sample" > depends on ARCH_OMAP1 && ARCH_OMAP730 > - help > + help > Support for TI OMAP 850 F-Sample board. Say Y here if you have such > a board. > > @@ -130,10 +130,10 @@ config MACH_OMAP_PALMZ71 > bool "Palm Zire71" > depends on ARCH_OMAP1 && ARCH_OMAP15XX > help > - Support for the Palm Zire71 PDA. To boot the kernel, > - you'll need a PalmOS compatible bootloader; check out > - http://hackndev.com/palm/z71 for more information. > - Say Y here if you have such a PDA, say N otherwise. > + Support for the Palm Zire71 PDA. To boot the kernel, > + you'll need a PalmOS compatible bootloader; check out > + http://hackndev.com/palm/z71 for more information. > + Say Y here if you have such a PDA, say N otherwise. > > config MACH_OMAP_PALMTT > bool "Palm Tungsten|T" > @@ -179,10 +179,10 @@ config MACH_OMAP_GENERIC > bool "Generic OMAP board" > depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) > help > - Support for generic OMAP-1510, 1610 or 1710 board with > - no FPGA. Can be used as template for porting Linux to > - custom OMAP boards. Say Y here if you have a custom > - board. > + Support for generic OMAP-1510, 1610 or 1710 board with > + no FPGA. Can be used as template for porting Linux to > + custom OMAP boards. Say Y here if you have a custom > + board. > > endmenu > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 5e33d1a..4db9516d 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -174,16 +174,16 @@ config SOC_TI81XX > default y > > config OMAP_PACKAGE_CBC > - bool > + bool > > config OMAP_PACKAGE_CBB > - bool > + bool > > config OMAP_PACKAGE_CUS > - bool > + bool > > config OMAP_PACKAGE_CBP > - bool > + bool > > comment "OMAP Legacy Platform Data Board Type" > depends on ARCH_OMAP2PLUS > @@ -208,10 +208,10 @@ config MACH_OMAP3_PANDORA > select OMAP_PACKAGE_CBB > > config MACH_NOKIA_N810 > - bool > + bool > > config MACH_NOKIA_N810_WIMAX > - bool > + bool > > config MACH_NOKIA_N8X0 > bool "Nokia N800/N810" > diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig > index 7426211..458c02f 100644 > --- a/arch/arm/mach-prima2/Kconfig > +++ b/arch/arm/mach-prima2/Kconfig > @@ -21,7 +21,7 @@ config ARCH_ATLAS6 > default y > select SIRF_IRQ > help > - Support for CSR SiRFSoC ARM Cortex A9 Platform > + Support for CSR SiRFSoC ARM Cortex A9 Platform > > config ARCH_ATLAS7 > bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform" > @@ -31,7 +31,7 @@ config ARCH_ATLAS7 > select HAVE_ARM_SCU if SMP > select HAVE_SMP > help > - Support for CSR SiRFSoC ARM Cortex A7 Platform > + Support for CSR SiRFSoC ARM Cortex A7 Platform > > config ARCH_PRIMA2 > bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" > @@ -40,7 +40,7 @@ config ARCH_PRIMA2 > select ZONE_DMA > select PRIMA2_TIMER > help > - Support for CSR SiRFSoC ARM Cortex A9 Platform > + Support for CSR SiRFSoC ARM Cortex A9 Platform > > config SIRF_IRQ > bool > diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig > index 686f0bb..bcc6ce4 100644 > --- a/arch/arm/mach-s3c24xx/Kconfig > +++ b/arch/arm/mach-s3c24xx/Kconfig > @@ -17,8 +17,6 @@ config PLAT_S3C24XX > help > Base platform code for any Samsung S3C24XX device > > - > - > menu "SAMSUNG S3C24XX SoCs Support" > > comment "S3C24XX SoCs" > @@ -138,11 +136,11 @@ config S3C2410_IOTIMING > and s3c2440/s3c2442 cpu frequency support. > > config S3C2410_CPUFREQ_UTILS > - bool > - depends on ARM_S3C24XX_CPUFREQ > - help > - Internal node to select timing code that is common to the s3c2410 > - and s3c2440/s3c244 cpu frequency support. > + bool > + depends on ARM_S3C24XX_CPUFREQ > + help > + Internal node to select timing code that is common to the s3c2410 > + and s3c2440/s3c244 cpu frequency support. > > # cpu frequency support common to s3c2412, s3c2413 and s3c2442 > > @@ -280,7 +278,7 @@ config MACH_VR1000 > help > Say Y here if you are using the Thorcom VR1000 board. > > -endif # CPU_S3C2410 > +endif # CPU_S3C2410 > > config S3C2412_PM_SLEEP > bool > @@ -354,7 +352,7 @@ config MACH_VSTMS > help > Say Y here if you are using an VSTMS board > > -endif # CPU_S3C2412 > +endif # CPU_S3C2412 > > if CPU_S3C2416 > > @@ -402,7 +400,7 @@ config MACH_S3C2416_DT > Note: This is under development and not all peripherals can be > supported > with this machine file. > > -endif # CPU_S3C2416 > +endif # CPU_S3C2416 > > if CPU_S3C2440 || CPU_S3C2442 > > @@ -528,7 +526,7 @@ config SMDK2440_CPU2440 > default y if ARCH_S3C2440 > select S3C2440_XTAL_16934400 > > -endif # CPU_S3C2440 > +endif # CPU_S3C2440 > > if CPU_S3C2442 > > @@ -548,7 +546,7 @@ config MACH_NEO1973_GTA02 > select S3C24XX_PWM > select S3C_DEV_USB_HOST > help > - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone > + Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone > > config MACH_RX1950 > bool "HP iPAQ rx1950" > @@ -560,9 +558,9 @@ config MACH_RX1950 > select S3C24XX_PWM > select S3C_DEV_NAND > help > - Say Y here if you're using HP iPAQ rx1950 > + Say Y here if you're using HP iPAQ rx1950 > > -endif # CPU_S3C2442 > +endif # CPU_S3C2442 > > if CPU_S3C2443 || CPU_S3C2416 > > @@ -571,7 +569,7 @@ config S3C2443_SETUP_SPI > help > Common setup code for SPI GPIO configurations > > -endif # CPU_S3C2443 || CPU_S3C2416 > +endif # CPU_S3C2443 || CPU_S3C2416 > > if CPU_S3C2443 > > @@ -584,7 +582,7 @@ config MACH_SMDK2443 > help > Say Y here if you are using an SMDK2443 > > -endif # CPU_S3C2443 > +endif # CPU_S3C2443 > > config PM_H1940 > bool > @@ -593,4 +591,4 @@ config PM_H1940 > > endmenu # SAMSUNG S3C24XX SoCs Support > > -endif # ARCH_S3C24XX > +endif # ARCH_S3C24XX > diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig > index 5700822..f6b05277 100644 > --- a/arch/arm/mach-s3c64xx/Kconfig > +++ b/arch/arm/mach-s3c64xx/Kconfig > @@ -100,7 +100,7 @@ config S3C64XX_SETUP_SDHCI_GPIO > config S3C64XX_SETUP_SPI > bool > help > - Common setup code for SPI GPIO configurations > + Common setup code for SPI GPIO configurations > > config S3C64XX_SETUP_USB_PHY > bool > @@ -110,7 +110,7 @@ config S3C64XX_SETUP_USB_PHY > # S36400 Macchine support > > config MACH_SMDK6400 > - bool "SMDK6400" > + bool "SMDK6400" > depends on ATAGS > select CPU_S3C6400 > select S3C64XX_SETUP_SDHCI > @@ -202,7 +202,7 @@ config SMDK6410_SD_CH0 > bool "Use channel 0 only" > depends on MACH_SMDK6410 > help > - Select CON7 (channel 0) as the MMC/SD slot, as > + Select CON7 (channel 0) as the MMC/SD slot, as > at least some SMDK6410 boards come with the > resistors fitted so that the card detects for > channels 0 and 1 are the same. > @@ -211,7 +211,7 @@ config SMDK6410_SD_CH1 > bool "Use channel 1 only" > depends on MACH_SMDK6410 > help > - Select CON6 (channel 1) as the MMC/SD slot, as > + Select CON6 (channel 1) as the MMC/SD slot, as > at least some SMDK6410 boards come with the > resistors fitted so that the card detects for > channels 0 and 1 are the same. > @@ -257,7 +257,7 @@ config MACH_NCP > select S3C_DEV_HSMMC1 > select S3C_DEV_I2C1 > help > - Machine support for the Samsung NCP > + Machine support for the Samsung NCP > > config MACH_HMT > bool "Airgoo HMT" > @@ -289,21 +289,21 @@ config MACH_SMARTQ > select SAMSUNG_DEV_PWM > select SAMSUNG_DEV_TS > help > - Shared machine support for SmartQ 5/7 > + Shared machine support for SmartQ 5/7 > > config MACH_SMARTQ5 > bool "SmartQ 5" > depends on ATAGS > select MACH_SMARTQ > help > - Machine support for the SmartQ 5 > + Machine support for the SmartQ 5 > > config MACH_SMARTQ7 > bool "SmartQ 7" > depends on ATAGS > select MACH_SMARTQ > help > - Machine support for the SmartQ 7 > + Machine support for the SmartQ 7 > > config MACH_WLF_CRAGG_6410 > bool "Wolfson Cragganmore 6410" > diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig > index ce41c67..b1c092c 100644 > --- a/arch/arm/mach-sa1100/Kconfig > +++ b/arch/arm/mach-sa1100/Kconfig > @@ -91,8 +91,8 @@ config SA1100_JORNADA720 > select SA1111 > help > Say Y here if you want to build a kernel for the HP Jornada 720 > - handheld computer. See > - > <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> > > + handheld computer. See > + > <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> > > config SA1100_JORNADA720_SSP > bool "HP Jornada 720 Extended SSP driver" > diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig > index 8841199..6343961 100644 > --- a/arch/arm/mach-vt8500/Kconfig > +++ b/arch/arm/mach-vt8500/Kconfig > @@ -10,9 +10,9 @@ config ARCH_VT8500 > > config ARCH_WM8505 > bool "VIA/Wondermedia 85xx and WM8650" > - depends on ARCH_MULTI_V5 > - select ARCH_VT8500 > - select CPU_ARM926T > + depends on ARCH_MULTI_V5 > + select ARCH_VT8500 > + select CPU_ARM926T > > config ARCH_WM8750 > bool "WonderMedia WM8750" > diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig > index b16ffc0..1fb3a3b 100644 > --- a/arch/arm/mach-w90x900/Kconfig > +++ b/arch/arm/mach-w90x900/Kconfig > @@ -23,7 +23,7 @@ config MACH_W90P910EVB > default y > select CPU_W90P910 > help > - Say Y here if you are using the Nuvoton W90P910EVB > + Say Y here if you are using the Nuvoton W90P910EVB > > endmenu > > @@ -33,7 +33,7 @@ config MACH_W90P950EVB > bool "Nuvoton NUC950 Evaluation Board" > select CPU_NUC950 > help > - Say Y here if you are using the Nuvoton NUC950EVB > + Say Y here if you are using the Nuvoton NUC950EVB > > endmenu > > @@ -43,7 +43,7 @@ config MACH_W90N960EVB > bool "Nuvoton NUC960 Evaluation Board" > select CPU_NUC960 > help > - Say Y here if you are using the Nuvoton NUC960EVB > + Say Y here if you are using the Nuvoton NUC960EVB > > endmenu > > diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig > index b169e58..23e75a1 100644 > --- a/arch/arm/mm/Kconfig > +++ b/arch/arm/mm/Kconfig > @@ -123,13 +123,13 @@ config CPU_ARM925T > select CPU_PABRT_LEGACY > select CPU_THUMB_CAPABLE > select CPU_TLB_V4WBI if MMU > - help > - The ARM925T is a mix between the ARM920T and ARM926T, but with > + help > + The ARM925T is a mix between the ARM920T and ARM926T, but with > different instruction and data caches. It is used in TI's OMAP > - device family. > + device family. > > - Say Y if you want support for the ARM925T processor. > - Otherwise, say N. > + Say Y if you want support for the ARM925T processor. > + Otherwise, say N. > > # ARM926T > config CPU_ARM926T > @@ -829,19 +829,19 @@ config HARDEN_BRANCH_PREDICTOR > depends on CPU_SPECTRE > default y > help > - Speculation attacks against some high-performance processors rely > - on being able to manipulate the branch predictor for a victim > - context by executing aliasing branches in the attacker context. > - Such attacks can be partially mitigated against by clearing > - internal branch predictor state and limiting the prediction > - logic in some situations. > + Speculation attacks against some high-performance processors rely > + on being able to manipulate the branch predictor for a victim > + context by executing aliasing branches in the attacker context. > + Such attacks can be partially mitigated against by clearing > + internal branch predictor state and limiting the prediction > + logic in some situations. > > - This config option will take CPU-specific actions to harden > - the branch predictor against aliasing attacks and may rely on > - specific instruction sequences or control bits being set by > - the system firmware. > + This config option will take CPU-specific actions to harden > + the branch predictor against aliasing attacks and may rely on > + specific instruction sequences or control bits being set by > + the system firmware. > > - If unsure, say Y. > + If unsure, say Y. > > config TLS_REG_EMUL > bool > @@ -983,14 +983,14 @@ if CACHE_L2X0 > config PL310_ERRATA_588369 > bool "PL310 errata: Clean & Invalidate maintenance operations do not > invalidate clean lines" > help > - The PL310 L2 cache controller implements three types of Clean & > - Invalidate maintenance operations: by Physical Address > - (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). > - They are architecturally defined to behave as the execution of a > - clean operation followed immediately by an invalidate operation, > - both performing to the same memory location. This functionality > - is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0) > - as clean lines are not invalidated as a result of these operations. > + The PL310 L2 cache controller implements three types of Clean & > + Invalidate maintenance operations: by Physical Address > + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). > + They are architecturally defined to behave as the execution of a > + clean operation followed immediately by an invalidate operation, > + both performing to the same memory location. This functionality > + is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0) > + as clean lines are not invalidated as a result of these operations. > > config PL310_ERRATA_727915 > bool "PL310 errata: Background Clean & Invalidate by Way operation can > cause data corruption" > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig > index 53da57f..1946c3d 100644 > --- a/arch/arm/plat-samsung/Kconfig > +++ b/arch/arm/plat-samsung/Kconfig > @@ -39,12 +39,12 @@ config SAMSUNG_ATAGS > def_bool n > depends on ATAGS > help > - This option enables ATAGS based boot support code for > - Samsung platforms, including static platform devices, legacy > - clock, timer and interrupt initialization, etc. > + This option enables ATAGS based boot support code for > + Samsung platforms, including static platform devices, legacy > + clock, timer and interrupt initialization, etc. > > - Platforms that support only DT based boot need not to select > - this option. > + Platforms that support only DT based boot need not to select > + this option. > > if SAMSUNG_ATAGS > > @@ -98,7 +98,7 @@ config S3C_DEV_HSMMC3 > config S3C_DEV_HWMON > bool > help > - Compile in platform device definitions for HWMON > + Compile in platform device definitions for HWMON > > config S3C_DEV_I2C1 > bool > @@ -202,7 +202,7 @@ config S3C64XX_DEV_SPI2 > config SAMSUNG_DEV_TS > bool > help > - Common in platform device definitions for touchscreen device > + Common in platform device definitions for touchscreen device > > config SAMSUNG_DEV_KEYPAD > bool > @@ -247,13 +247,13 @@ config SAMSUNG_PM_DEBUG > for more information. > > config S3C_PM_DEBUG_LED_SMDK > - bool "SMDK LED suspend/resume debugging" > - depends on PM && (MACH_SMDK6410) > - help > - Say Y here to enable the use of the SMDK LEDs on the baseboard > - for debugging of the state of the suspend and resume process. > + bool "SMDK LED suspend/resume debugging" > + depends on PM && (MACH_SMDK6410) > + help > + Say Y here to enable the use of the SMDK LEDs on the baseboard > + for debugging of the state of the suspend and resume process. > > - Note, this currently only works for S3C64XX based SMDK boards. > + Note, this currently only works for S3C64XX based SMDK boards. > > config SAMSUNG_PM_CHECK > bool "S3C2410 PM Suspend Memory CRC"
