On Mon, Mar 11, 2019 at 02:18:31PM +0100, Enrico Weigelt, metux IT consult wrote: > Formatting of Kconfig files doesn't look so pretty, so let the > Great White Handkerchief come around and clean it up. > > Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
IPMI portions look ok to me. Acked-by: Corey Minyard <[email protected]> > --- > drivers/char/Kconfig | 24 +++++----- > drivers/char/agp/Kconfig | 13 +++--- > drivers/char/hw_random/Kconfig | 24 +++++----- > drivers/char/ipmi/Kconfig | 99 > +++++++++++++++++++++--------------------- > 4 files changed, 80 insertions(+), 80 deletions(-) > > diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig > index 72866a0..ab33583 100644 > --- a/drivers/char/Kconfig > +++ b/drivers/char/Kconfig > @@ -35,18 +35,18 @@ config SGI_SNSC > say Y. Otherwise, say N. > > config SGI_TIOCX > - bool "SGI TIO CX driver support" > - depends on (IA64_SGI_SN2 || IA64_GENERIC) > - help > - If you have an SGI Altix and you have fpga devices attached > - to your TIO, say Y here, otherwise say N. > + bool "SGI TIO CX driver support" > + depends on (IA64_SGI_SN2 || IA64_GENERIC) > + help > + If you have an SGI Altix and you have fpga devices attached > + to your TIO, say Y here, otherwise say N. > > config SGI_MBCS > - tristate "SGI FPGA Core Services driver support" > - depends on SGI_TIOCX > - help > - If you have an SGI Altix with an attached SABrick > - say Y or M here, otherwise say N. > + tristate "SGI FPGA Core Services driver support" > + depends on SGI_TIOCX > + help > + If you have an SGI Altix with an attached SABrick > + say Y or M here, otherwise say N. > > source "drivers/tty/serial/Kconfig" > source "drivers/tty/serdev/Kconfig" > @@ -461,8 +461,8 @@ config RAW_DRIVER > Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. > See the raw(8) manpage for more details. > > - Applications should preferably open the device (eg /dev/hda1) > - with the O_DIRECT flag. > + Applications should preferably open the device (eg /dev/hda1) > + with the O_DIRECT flag. > > config MAX_RAW_DEVS > int "Maximum number of RAW devices to support (1-65536)" > diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig > index 6231714..6da28d5 100644 > --- a/drivers/char/agp/Kconfig > +++ b/drivers/char/agp/Kconfig > @@ -63,7 +63,7 @@ config AGP_AMD64 > This option gives you AGP support for the GLX component of > X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs. > You still need an external AGP bridge like the AMD 8151, VIA > - K8T400M, SiS755. It may also support other AGP bridges when loaded > + K8T400M, SiS755. It may also support other AGP bridges when loaded > with agp_try_unsupported=1. > > config AGP_INTEL > @@ -151,13 +151,12 @@ config AGP_EFFICEON > series processors with integrated northbridges. > > config AGP_SGI_TIOCA > - tristate "SGI TIO chipset AGP support" > - depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC) > - help > - This option gives you AGP GART support for the SGI TIO chipset > - for IA64 processors. > + tristate "SGI TIO chipset AGP support" > + depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC) > + help > + This option gives you AGP GART support for the SGI TIO chipset > + for IA64 processors. > > config INTEL_GTT > tristate > depends on X86 && PCI > - > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig > index 25a7d8f..6265931 100644 > --- a/drivers/char/hw_random/Kconfig > +++ b/drivers/char/hw_random/Kconfig > @@ -156,15 +156,15 @@ config HW_RANDOM_OMAP > tristate "OMAP Random Number Generator support" > depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU > default HW_RANDOM > - ---help--- > - This driver provides kernel-side support for the Random Number > + ---help--- > + This driver provides kernel-side support for the Random Number > Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx > multimedia processors, and Marvell Armada 7k/8k SoCs. > > To compile this driver as a module, choose M here: the > module will be called omap-rng. > > - If unsure, say Y. > + If unsure, say Y. > > config HW_RANDOM_OMAP3_ROM > tristate "OMAP3 ROM Random Number Generator support" > @@ -372,17 +372,17 @@ config HW_RANDOM_MESON > If unsure, say Y. > > config HW_RANDOM_CAVIUM > - tristate "Cavium ThunderX Random Number Generator support" > - depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT)) > - default HW_RANDOM > - ---help--- > - This driver provides kernel-side support for the Random Number > - Generator hardware found on Cavium SoCs. > + tristate "Cavium ThunderX Random Number Generator support" > + depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT)) > + default HW_RANDOM > + ---help--- > + This driver provides kernel-side support for the Random Number > + Generator hardware found on Cavium SoCs. > > - To compile this driver as a module, choose M here: the > - module will be called cavium_rng. > + To compile this driver as a module, choose M here: the > + module will be called cavium_rng. > > - If unsure, say Y. > + If unsure, say Y. > > config HW_RANDOM_MTK > tristate "Mediatek Random Number Generator support" > diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig > index 94719fc..b6219c3 100644 > --- a/drivers/char/ipmi/Kconfig > +++ b/drivers/char/ipmi/Kconfig > @@ -1,40 +1,41 @@ > + > # > # IPMI device configuration > # > > menuconfig IPMI_HANDLER > - tristate 'IPMI top-level message handler' > - depends on HAS_IOMEM > - select IPMI_DMI_DECODE if DMI > - help > - This enables the central IPMI message handler, required for IPMI > - to work. > + tristate 'IPMI top-level message handler' > + depends on HAS_IOMEM > + select IPMI_DMI_DECODE if DMI > + help > + This enables the central IPMI message handler, required for IPMI > + to work. > > - IPMI is a standard for managing sensors (temperature, > - voltage, etc.) in a system. > + IPMI is a standard for managing sensors (temperature, > + voltage, etc.) in a system. > > - See <file:Documentation/IPMI.txt> for more details on the driver. > + See <file:Documentation/IPMI.txt> for more details on the driver. > > - If unsure, say N. > + If unsure, say N. > > config IPMI_DMI_DECODE > - select IPMI_PLAT_DATA > - bool > + select IPMI_PLAT_DATA > + bool > > config IPMI_PLAT_DATA > - bool > + bool > > if IPMI_HANDLER > > config IPMI_PANIC_EVENT > - bool 'Generate a panic event to all BMCs on a panic' > - help > - When a panic occurs, this will cause the IPMI message handler to, > - by default, generate an IPMI event describing the panic to each > - interface registered with the message handler. This is always > - available, the module parameter for ipmi_msghandler named > - panic_op can be set to "event" to chose this value, this config > - simply causes the default value to be set to "event". > + bool 'Generate a panic event to all BMCs on a panic' > + help > + When a panic occurs, this will cause the IPMI message handler to, > + by default, generate an IPMI event describing the panic to each > + interface registered with the message handler. This is always > + available, the module parameter for ipmi_msghandler named > + panic_op can be set to "event" to chose this value, this config > + simply causes the default value to be set to "event". > > config IPMI_PANIC_STRING > bool 'Generate OEM events containing the panic string' > @@ -53,43 +54,43 @@ config IPMI_PANIC_STRING > causes the default value to be set to "string". > > config IPMI_DEVICE_INTERFACE > - tristate 'Device interface for IPMI' > - help > - This provides an IOCTL interface to the IPMI message handler so > - userland processes may use IPMI. It supports poll() and select(). > + tristate 'Device interface for IPMI' > + help > + This provides an IOCTL interface to the IPMI message handler so > + userland processes may use IPMI. It supports poll() and select(). > > config IPMI_SI > - tristate 'IPMI System Interface handler' > - select IPMI_PLAT_DATA > - help > - Provides a driver for System Interfaces (KCS, SMIC, BT). > - Currently, only KCS and SMIC are supported. If > - you are using IPMI, you should probably say "y" here. > + tristate 'IPMI System Interface handler' > + select IPMI_PLAT_DATA > + help > + Provides a driver for System Interfaces (KCS, SMIC, BT). > + Currently, only KCS and SMIC are supported. If > + you are using IPMI, you should probably say "y" here. > > config IPMI_SSIF > - tristate 'IPMI SMBus handler (SSIF)' > - select I2C > - help > - Provides a driver for a SMBus interface to a BMC, meaning that you > - have a driver that must be accessed over an I2C bus instead of a > - standard interface. This module requires I2C support. > + tristate 'IPMI SMBus handler (SSIF)' > + select I2C > + help > + Provides a driver for a SMBus interface to a BMC, meaning that you > + have a driver that must be accessed over an I2C bus instead of a > + standard interface. This module requires I2C support. > > config IPMI_POWERNV > - depends on PPC_POWERNV > - tristate 'POWERNV (OPAL firmware) IPMI interface' > - help > - Provides a driver for OPAL firmware-based IPMI interfaces. > + depends on PPC_POWERNV > + tristate 'POWERNV (OPAL firmware) IPMI interface' > + help > + Provides a driver for OPAL firmware-based IPMI interfaces. > > config IPMI_WATCHDOG > - tristate 'IPMI Watchdog Timer' > - help > - This enables the IPMI watchdog timer. > + tristate 'IPMI Watchdog Timer' > + help > + This enables the IPMI watchdog timer. > > config IPMI_POWEROFF > - tristate 'IPMI Poweroff' > - help > - This enables a function to power off the system with IPMI if > - the IPMI management controller is capable of this. > + tristate 'IPMI Poweroff' > + help > + This enables a function to power off the system with IPMI if > + the IPMI management controller is capable of this. > > endif # IPMI_HANDLER > > @@ -125,7 +126,7 @@ config NPCM7XX_KCS_IPMI_BMC > > config ASPEED_BT_IPMI_BMC > depends on ARCH_ASPEED || COMPILE_TEST > - depends on REGMAP && REGMAP_MMIO && MFD_SYSCON > + depends on REGMAP && REGMAP_MMIO && MFD_SYSCON > tristate "BT IPMI bmc driver" > help > Provides a driver for the BT (Block Transfer) IPMI interface > -- > 1.9.1 >
