From: Qiao Zhou <[email protected]> Add pinctrl definition and configuration of ASR8751C pins. The configuration contains pull up/down, driver strength, edge detection, multiple function etc.
Signed-off-by: qiaozhou <[email protected]> --- include/dt-bindings/pinctrl/asr8751c-pinfunc.h | 341 +++++++++++++++++++++++++ 1 file changed, 341 insertions(+) create mode 100644 include/dt-bindings/pinctrl/asr8751c-pinfunc.h diff --git a/include/dt-bindings/pinctrl/asr8751c-pinfunc.h b/include/dt-bindings/pinctrl/asr8751c-pinfunc.h new file mode 100644 index 0000000..b326a6d --- /dev/null +++ b/include/dt-bindings/pinctrl/asr8751c-pinfunc.h @@ -0,0 +1,341 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for ASR Aquila pinctrl bindings. + * + * Copyright (c) 2019, ASR Microelectronics(Shanghai) Co., Ltd. + * All rights reserved. + * + * Author: Tim Wang <[email protected]> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __DTS_ASR8751C_PINFUNC_H +#define __DTS_ASR8751C_PINFUNC_H + +/* + * drive-strength = <value mask> + * SLOW0: < 75MHz + * SLOW1: < 150MHz + * MEDIUM: < 200MHz + * FAST: > 200MHz + */ +#define DS_SLOW0 pinctrl-single,drive-strength = <0x0000 0x1800> +#define DS_SLOW1 pinctrl-single,drive-strength = <0x0800 0x1800> +#define DS_MEDIUM pinctrl-single,drive-strength = <0x1000 0x1800> +#define DS_FAST pinctrl-single,drive-strength = <0x1800 0x1800> + +/* + * Edge detect setting + * input-schmitt = <value mask>; + * input-schmitt-enable = <value enable disable mask> + */ + +/* no edge detect */ +#define EDGE_NONE pinctrl-single,input-schmitt = <0x00 0x30>; \ + pinctrl-single,input-schmitt-enable = <0x40 0x00 0x40 0x40> +/* enable edge fall detect only*/ +#define EDGE_FALL pinctrl-single,input-schmitt = <0x20 0x30>; \ + pinctrl-single,input-schmitt-enable = <0x00 0x00 0x40 0x40> +/* enable edge rise detect only */ +#define EDGE_RISE pinctrl-single,input-schmitt = <0x10 0x30>; \ + pinctrl-single,input-schmitt-enable = <0x00 0x00 0x40 0x40> +/* enable edge fall/rise detect */ +#define EDGE_BOTH pinctrl-single,input-schmitt = <0x30 0x30>; \ + pinctrl-single,input-schmitt-enable = <0x00 0x00 0x40 0x40> + +/* + * bias-pullup = <value enable disable mask>; + * bias-pulldown = <value enable disable mask> + */ + +/* PULL_SEL controlled by Alternative Function */ +#define PULL_NONE pinctrl-single,bias-pullup = <0x0000 0xc000 0x0000 0xc000>; \ + pinctrl-single,bias-pulldown = <0x0000 0xa000 0x0000 0xa000> +/* PULL_SEL controlled by MFPR, enable PULL_UP, disable PULL_DOWN */ +#define PULL_UP pinctrl-single,bias-pullup = <0xc000 0xc000 0x0000 0xc000>; \ + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000> +/* PULL_SEL controlled by MFPR, disable PULL_UP, enable PULL_DOWN */ +#define PULL_DOWN pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>; \ + pinctrl-single,bias-pulldown = <0xa000 0xa000 0x0000 0xa000> +/* PULL_SEL controlled by MFPR, enable PULL_UP and PULL_DOWN */ +#define PULL_BOTH pinctrl-single,bias-pullup = <0xc000 0xc000 0x8000 0xc000>; \ + pinctrl-single,bias-pulldown = <0xa000 0xa000 0x8000 0xa000> +/* PULL_SEL controlled by MFPR, disable PULL_UP and PULL_DOWN */ +#define PULL_FLOAT pinctrl-single,bias-pullup = <0x8000 0x8000 0x0000 0xc000>; \ + pinctrl-single,bias-pulldown = <0x8000 0x8000 0x0000 0xa000> +/* Low Power Mode settings */ +/* no LPM setting, LPM state same as active */ +#define LPM_NONE pinctrl-single,low-power-mode = <0x000 0x388> +/* LPM, output 0 */ +#define LPM_DRIVE_LOW pinctrl-single,low-power-mode = <0x208 0x388> +/* LPM, output 1*/ +#define LPM_DRIVE_HIGH pinctrl-single,low-power-mode = <0x308 0x388> +/* LPM, input state */ +#define LPM_FLOAT pinctrl-single,low-power-mode = <0x288 0x388> + +/* Active settings */ +#define MFP_DEFAULT DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_NONE +#define MFP_PULL_UP DS_MEDIUM;PULL_UP;EDGE_NONE;LPM_NONE +#define MFP_PULL_DOWN DS_MEDIUM;PULL_DOWN;EDGE_NONE;LPM_NONE +#define MFP_PULL_FLOAT DS_MEDIUM;PULL_FLOAT;EDGE_NONE;LPM_NONE + +/* LPM output */ +#define MFP_LPM_DRIVE_HIGH DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_DRIVE_HIGH +#define MFP_LPM_DRIVE_LOW DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_DRIVE_LOW + +/* LPM input */ +#define MFP_LPM_FLOAT DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_FLOAT +#define MFP_LPM_PULL_UP DS_MEDIUM;PULL_UP;EDGE_NONE;LPM_FLOAT +#define MFP_LPM_PULL_DW DS_MEDIUM;PULL_DOWN;EDGE_NONE;LPM_FLOAT + +/* + * MFP alternative functions 0-7 + */ +#define AF0 0x0 +#define AF1 0x1 +#define AF2 0x2 +#define AF3 0x3 +#define AF4 0x4 +#define AF5 0x5 +#define AF6 0x6 +#define AF7 0x7 + +/* + * Pin names and MFPR addresses + */ +#define MFPR_OFFSET(x) ((x) << 2) +#define GPIO_00 MFPR_OFFSET(1) +#define GPIO_01 MFPR_OFFSET(2) +#define GPIO_02 MFPR_OFFSET(3) +#define GPIO_03 MFPR_OFFSET(4) +#define GPIO_04 MFPR_OFFSET(5) +#define GPIO_05 MFPR_OFFSET(6) +#define GPIO_06 MFPR_OFFSET(7) +#define GPIO_07 MFPR_OFFSET(8) +#define GPIO_08 MFPR_OFFSET(9) +#define GPIO_09 MFPR_OFFSET(10) +#define GPIO_10 MFPR_OFFSET(11) +#define GPIO_11 MFPR_OFFSET(12) +#define GPIO_12 MFPR_OFFSET(13) +#define GPIO_13 MFPR_OFFSET(14) +#define GPIO_14 MFPR_OFFSET(15) +#define GPIO_15 MFPR_OFFSET(16) +#define GPIO_16 MFPR_OFFSET(17) +#define GPIO_17 MFPR_OFFSET(18) +#define GPIO_18 MFPR_OFFSET(19) +#define GPIO_19 MFPR_OFFSET(20) +#define GPIO_20 MFPR_OFFSET(21) +#define GPIO_21 MFPR_OFFSET(22) +#define GPIO_22 MFPR_OFFSET(23) +#define GPIO_23 MFPR_OFFSET(24) +#define GPIO_24 MFPR_OFFSET(25) +#define GPIO_25 MFPR_OFFSET(26) +#define RXTXEN MFPR_OFFSET(27) +#define PRI_TXFRAME MFPR_OFFSET(28) +#define SPI0_EN MFPR_OFFSET(29) +#define RF_RESET_N MFPR_OFFSET(30) +#define SEC_SYSCLKEN MFPR_OFFSET(31) +#define PRI_RXFRAME MFPR_OFFSET(32) +#define PRI_RBDP0_0 MFPR_OFFSET(33) +#define PRI_RBDP0_1 MFPR_OFFSET(34) +#define PRI_RBDP0_2 MFPR_OFFSET(35) +#define PRI_RBDP0_3 MFPR_OFFSET(36) +#define PRI_RBDP0_4 MFPR_OFFSET(37) +#define PRI_RBDP0_5 MFPR_OFFSET(38) +#define PRI_RBDP0_6 MFPR_OFFSET(39) +#define PRI_RBDP0_7 MFPR_OFFSET(40) +#define PRI_RBDP0_8 MFPR_OFFSET(41) +#define PRI_RBDP0_9 MFPR_OFFSET(42) +#define PRI_RBDP0_10 MFPR_OFFSET(43) +#define PRI_MCLK MFPR_OFFSET(98) +#define PRI_RBDP0_11 MFPR_OFFSET(44) +#define RXTXDATA MFPR_OFFSET(45) +#define SYSCLK_OUT MFPR_OFFSET(46) +#define PRI_FCLK MFPR_OFFSET(47) +#define PRI_RBDP1_0 MFPR_OFFSET(48) +#define PRI_RBDP1_1 MFPR_OFFSET(49) +#define SPI0_CLK MFPR_OFFSET(50) +#define PRI_RBDP1_2 MFPR_OFFSET(51) +#define PRI_RBDP1_3 MFPR_OFFSET(52) +#define PRI_RBDP1_4 MFPR_OFFSET(53) +#define PRI_RBDP1_5 MFPR_OFFSET(54) +#define PRI_RBDP1_6 MFPR_OFFSET(55) +#define PRI_RBDP1_7 MFPR_OFFSET(56) +#define PRI_RBDP1_8 MFPR_OFFSET(57) +#define PRI_RBDP1_9 MFPR_OFFSET(58) +#define SPI0_DIO MFPR_OFFSET(59) +#define PRI_RBDP1_10 MFPR_OFFSET(60) +#define PRI_RBDP1_11 MFPR_OFFSET(61) +#define SPI1_EN MFPR_OFFSET(62) +#define SEC_RXFRAME MFPR_OFFSET(63) +#define SEC_RBDP0_0 MFPR_OFFSET(64) +#define SEC_RBDP0_1 MFPR_OFFSET(65) +#define SEC_RBDP0_2 MFPR_OFFSET(66) +#define SEC_RBDP0_3 MFPR_OFFSET(67) +#define SEC_RBDP0_4 MFPR_OFFSET(68) +#define SEC_RBDP0_5 MFPR_OFFSET(69) +#define SEC_RBDP0_6 MFPR_OFFSET(70) +#define SEC_RBDP0_7 MFPR_OFFSET(71) +#define SEC_RBDP0_8 MFPR_OFFSET(72) +#define SEC_RBDP0_9 MFPR_OFFSET(73) +#define SEC_RBDP0_10 MFPR_OFFSET(74) +#define SEC_MCLK MFPR_OFFSET(99) +#define SEC_RBDP0_11 MFPR_OFFSET(75) +#define SPI1_CLK MFPR_OFFSET(76) +#define SPI1_DIO MFPR_OFFSET(77) +#define CP_GPO_0 MFPR_OFFSET(78) +#define CP_GPO_1 MFPR_OFFSET(79) +#define CP_GPO_2 MFPR_OFFSET(80) +#define CP_GPO_3 MFPR_OFFSET(81) +#define CP_GPO_4 MFPR_OFFSET(82) +#define CP_GPO_5 MFPR_OFFSET(83) +#define CP_GPO_6 MFPR_OFFSET(84) +#define CP_GPO_7 MFPR_OFFSET(85) +#define CP_GPO_8 MFPR_OFFSET(86) +#define CP_GPO_9 MFPR_OFFSET(87) +#define CP_GPO_10 MFPR_OFFSET(88) +#define CP_GPO_11 MFPR_OFFSET(89) +#define CP_GPO_12 MFPR_OFFSET(90) +#define CP_GPO_13 MFPR_OFFSET(91) +#define CP_GPO_14 MFPR_OFFSET(92) +#define CP_GPO_15 MFPR_OFFSET(93) +#define CP_UART_RXD MFPR_OFFSET(94) +#define CP_UART_TXD MFPR_OFFSET(95) +#define CP_UART_RTS MFPR_OFFSET(96) +#define CP_UART_CTS MFPR_OFFSET(97) +#define USIM2_UCLK MFPR_OFFSET(100) +#define USIM2_UIO MFPR_OFFSET(101) +#define USIM2_URSTn MFPR_OFFSET(102) +#define USIM_UCLK MFPR_OFFSET(103) +#define USIM_UIO MFPR_OFFSET(104) +#define USIM_URSTn MFPR_OFFSET(105) +#define MMC1_DAT3 MFPR_OFFSET(110) +#define MMC1_DAT2 MFPR_OFFSET(111) +#define MMC1_DAT1 MFPR_OFFSET(112) +#define MMC1_DAT0 MFPR_OFFSET(113) +#define MMC1_CMD MFPR_OFFSET(114) +#define MMC1_CLK MFPR_OFFSET(115) +#define PWR_SCL MFPR_OFFSET(118) +#define PWR_SDA MFPR_OFFSET(119) +#define VCXO_EN MFPR_OFFSET(120) +#define VBAT_DROP MFPR_OFFSET(121) +#define PMIC_INT_N MFPR_OFFSET(122) +#define PRI_TDI MFPR_OFFSET(123) +#define PRI_TMS MFPR_OFFSET(124) +#define PRI_TCK MFPR_OFFSET(125) +#define PRI_TDO MFPR_OFFSET(126) +#define SLAVE_RESET_OUT MFPR_OFFSET(127) +#define VCXO_REQ1 MFPR_OFFSET(128) +#define VCXO_REQ MFPR_OFFSET(129) +#define VCXO_OUT MFPR_OFFSET(130) +#define GPIO_26 MFPR_OFFSET(131) +#define GPIO_27 MFPR_OFFSET(132) +#define GPIO_28 MFPR_OFFSET(133) +#define GPIO_29 MFPR_OFFSET(134) +#define GPIO_30 MFPR_OFFSET(135) +#define GPIO_31 MFPR_OFFSET(136) +#define GPIO_32 MFPR_OFFSET(137) +#define GPIO_33 MFPR_OFFSET(138) +#define GPIO_34 MFPR_OFFSET(139) +#define GPIO_35 MFPR_OFFSET(140) +#define GPIO_36 MFPR_OFFSET(141) +#define GPIO_37 MFPR_OFFSET(142) +#define GPIO_38 MFPR_OFFSET(143) +#define GPIO_39 MFPR_OFFSET(144) +#define GPIO_40 MFPR_OFFSET(145) +#define GPIO_41 MFPR_OFFSET(146) +#define GPIO_42 MFPR_OFFSET(147) +#define GPIO_43 MFPR_OFFSET(148) +#define GPIO_44 MFPR_OFFSET(149) +#define GPIO_45 MFPR_OFFSET(150) +#define GPIO_46 MFPR_OFFSET(151) +#define GPIO_47 MFPR_OFFSET(152) +#define GPIO_48 MFPR_OFFSET(153) +#define GPIO_49 MFPR_OFFSET(154) +#define GPIO_50 MFPR_OFFSET(155) +#define GPIO_51 MFPR_OFFSET(156) +#define GPIO_52 MFPR_OFFSET(157) +#define GPIO_53 MFPR_OFFSET(158) +#define GPIO_54 MFPR_OFFSET(159) +#define GPIO_55 MFPR_OFFSET(160) +#define GPIO_56 MFPR_OFFSET(161) +#define GPIO_57 MFPR_OFFSET(162) +#define GPIO_58 MFPR_OFFSET(163) +#define GPIO_59 MFPR_OFFSET(164) +#define GPIO_60 MFPR_OFFSET(165) +#define GPIO_61 MFPR_OFFSET(166) +#define GPIO_62 MFPR_OFFSET(167) +#define GPIO_63 MFPR_OFFSET(168) +#define GPIO_64 MFPR_OFFSET(169) +#define GPIO_65 MFPR_OFFSET(170) +#define GPIO_66 MFPR_OFFSET(171) +#define GPIO_67 MFPR_OFFSET(172) +#define GPIO_68 MFPR_OFFSET(173) +#define GPIO_69 MFPR_OFFSET(174) +#define GPIO_70 MFPR_OFFSET(175) +#define GPIO_71 MFPR_OFFSET(176) +#define GPIO_72 MFPR_OFFSET(177) +#define GPIO_73 MFPR_OFFSET(178) +#define GPIO_74 MFPR_OFFSET(179) +#define GPIO_75 MFPR_OFFSET(180) +#define GPIO_76 MFPR_OFFSET(181) +#define GPIO_77 MFPR_OFFSET(182) +#define GPIO_78 MFPR_OFFSET(183) +#define GPIO_79 MFPR_OFFSET(184) +#define GPIO_80 MFPR_OFFSET(185) +#define GPIO_81 MFPR_OFFSET(186) +#define GPIO_82 MFPR_OFFSET(187) +#define GPIO_83 MFPR_OFFSET(188) +#define GPIO_84 MFPR_OFFSET(189) +#define GPIO_85 MFPR_OFFSET(190) +#define GPIO_86 MFPR_OFFSET(191) +#define GPIO_87 MFPR_OFFSET(192) +#define GPIO_88 MFPR_OFFSET(193) +#define GPIO_89 MFPR_OFFSET(194) +#define GPIO_90 MFPR_OFFSET(195) +#define GPIO_91 MFPR_OFFSET(196) +#define GPIO_92 MFPR_OFFSET(197) +#define GPIO_93 MFPR_OFFSET(198) +#define GPIO_94 MFPR_OFFSET(199) +#define GPIO_95 MFPR_OFFSET(200) +#define GPIO_96 MFPR_OFFSET(201) +#define GPIO_97 MFPR_OFFSET(202) +#define GPIO_98 MFPR_OFFSET(203) +#define GPIO_99 MFPR_OFFSET(204) +#define GPIO_100 MFPR_OFFSET(205) +#define GPIO_101 MFPR_OFFSET(206) +#define GPIO_102 MFPR_OFFSET(207) +#define GPIO_103 MFPR_OFFSET(208) +#define GPIO_104 MFPR_OFFSET(209) +#define GPIO_105 MFPR_OFFSET(210) +#define GPIO_106 MFPR_OFFSET(211) +#define GPIO_107 MFPR_OFFSET(212) +#define GPIO_108 MFPR_OFFSET(213) +#define GPIO_109 MFPR_OFFSET(214) +#define GPIO_110 MFPR_OFFSET(215) +#define GPIO_111 MFPR_OFFSET(216) +#define GPIO_112 MFPR_OFFSET(217) +#define GPIO_113 MFPR_OFFSET(218) +#define GPIO_114 MFPR_OFFSET(219) +#define GPIO_115 MFPR_OFFSET(220) +#define GPIO_116 MFPR_OFFSET(221) +#define GPIO_117 MFPR_OFFSET(222) +#define GPIO_118 MFPR_OFFSET(223) +#define GPIO_119 MFPR_OFFSET(224) +#define GPIO_120 MFPR_OFFSET(225) +#define GPIO_121 MFPR_OFFSET(226) +#define GPIO_122 MFPR_OFFSET(227) +#define GPIO_123 MFPR_OFFSET(228) +#define GPIO_124 MFPR_OFFSET(229) +#define GPIO_125 MFPR_OFFSET(230) +#define GPIO_126 MFPR_OFFSET(231) +#define GPIO_127 MFPR_OFFSET(232) +#endif /* __DTS_ASR8751C_PINFUNC_H */ -- 2.7.4
