This patch adds the HDMI, CVBS and CEC attributes and nodes to support full display on the SEI510 STB.
AO-CEC-A is used for now until AO-CEC-B is supported. Signed-off-by: Neil Armstrong <[email protected]> --- .../boot/dts/amlogic/meson-g12a-sei510.dts | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c350a0165d44..3e7a8a4093f2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -44,6 +44,16 @@ stdout-path = "serial0:115200n8"; }; + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + dc_in: regulator-dc_in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; @@ -61,6 +71,17 @@ regulator-always-on; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; @@ -103,6 +124,19 @@ }; }; +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao1v8>; @@ -120,6 +154,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; -- 2.21.0
