Move the device class fudge to a proper fixup function, and remove qcom_pcie_rd_own_conf() which has become useless.
NB: dw_pcie_setup_rc() already did the right thing, but it's broken on older qcom chips, such as 8064. Signed-off-by: Marc Gonzalez <[email protected]> --- Changes from v4 to v5: Apply fixup to all qcom chips, the same way it was before (thus the code remains functionally equivalent) Drop Srinivas' Tested-by tag because of the change --- drivers/pci/controller/dwc/pcie-qcom.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index a7f703556790..0ed235d560e3 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp) return ret; } -static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, - u32 *val) -{ - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - - /* the device class is not reported correctly from the register */ - if (where == PCI_CLASS_REVISION && size == 4) { - *val = readl(pci->dbi_base + PCI_CLASS_REVISION); - *val &= 0xff; /* keep revision id */ - *val |= PCI_CLASS_BRIDGE_PCI << 16; - return PCIBIOS_SUCCESSFUL; - } - - return dw_pcie_read(pci->dbi_base + where, size, val); -} - static const struct dw_pcie_host_ops qcom_pcie_dw_ops = { .host_init = qcom_pcie_host_init, - .rd_own_conf = qcom_pcie_rd_own_conf, }; /* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */ @@ -1309,6 +1292,12 @@ static const struct of_device_id qcom_pcie_match[] = { { } }; +static void qcom_fixup_class(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); + static struct platform_driver qcom_pcie_driver = { .probe = qcom_pcie_probe, .driver = { -- 2.17.1
