Add support to parse and update OPP tables attached to the cpu nodes.

Signed-off-by: Sibi Sankar <[email protected]>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c 
b/drivers/cpufreq/qcom-cpufreq-hw.c
index 4b0b50403901..5c268dd2346c 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -73,6 +73,25 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct 
cpufreq_policy *policy,
        return policy->freq_table[index].frequency;
 }
 
+static int qcom_find_update_opp(struct device *cpu_dev, unsigned long freq,
+                               unsigned long volt)
+{
+       int ret;
+       struct dev_pm_opp *opp;
+
+       opp = dev_pm_opp_find_freq_exact(cpu_dev, freq, true);
+       if (IS_ERR(opp)) {
+               ret = dev_pm_opp_add(cpu_dev, freq, volt);
+       } else {
+               dev_pm_opp_disable(cpu_dev, freq);
+               ret = dev_pm_opp_update_voltage(cpu_dev, freq, volt);
+               dev_pm_opp_enable(cpu_dev, freq);
+               dev_pm_opp_put(opp);
+       }
+
+       return ret;
+}
+
 static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
                                    struct cpufreq_policy *policy,
                                    void __iomem *base)
@@ -81,11 +100,16 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
        u32 volt;
        unsigned int max_cores = cpumask_weight(policy->cpus);
        struct cpufreq_frequency_table  *table;
+       int ret;
 
        table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
        if (!table)
                return -ENOMEM;
 
+       ret = dev_pm_opp_of_add_table(cpu_dev);
+       if (ret)
+               dev_dbg(cpu_dev, "Couldn't add OPP table\n");
+
        for (i = 0; i < LUT_MAX_ENTRIES; i++) {
                data = readl_relaxed(base + REG_FREQ_LUT +
                                      i * LUT_ROW_SIZE);
@@ -104,7 +128,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 
                if (freq != prev_freq && core_count == max_cores) {
                        table[i].frequency = freq;
-                       dev_pm_opp_add(cpu_dev, freq * 1000, volt);
+                       qcom_find_update_opp(cpu_dev, freq * 1000, volt);
                        dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
                                freq, core_count);
                } else {
@@ -125,7 +149,8 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
                        if (prev_cc != max_cores) {
                                prev->frequency = prev_freq;
                                prev->flags = CPUFREQ_BOOST_FREQ;
-                               dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt);
+                               qcom_find_update_opp(cpu_dev, prev_freq * 1000,
+                                                    volt);
                        }
 
                        break;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Reply via email to