On Mon, Apr 1, 2019 at 10:24 AM Daniel Lezcano <daniel.lezc...@linaro.org> wrote: > > The module support for the thermal subsystem does have a little sense: > - some subsystems relying on it are not modules, thus forcing the > framework to be compiled in > - it is compiled in for almost every configs, the remaining ones > are a few platforms where I don't see why we can not switch the thermal > to 'y'. The drivers can stay in tristate. > - platforms need the thermal to be ready as soon as possible at boot time > in order to mitigate > > Usually the subsystems framework are compiled-in and the plugs are as module. > > Remove the module option. The removal of the module related dead code will > come after this patch gets in or is acked. > > Signed-off-by: Daniel Lezcano <daniel.lezc...@linaro.org>
Reviewed-by: Amit Kucheria <amit.kuche...@linaro.org> > --- > arch/arm/configs/mini2440_defconfig | 2 +- > arch/arm/configs/pxa_defconfig | 2 +- > arch/mips/configs/ip22_defconfig | 2 +- > arch/mips/configs/ip27_defconfig | 2 +- > arch/unicore32/configs/unicore32_defconfig | 2 +- > drivers/thermal/Kconfig | 4 ++-- > 6 files changed, 7 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/configs/mini2440_defconfig > b/arch/arm/configs/mini2440_defconfig > index d95a8059d30b..0cf1c120c4bb 100644 > --- a/arch/arm/configs/mini2440_defconfig > +++ b/arch/arm/configs/mini2440_defconfig > @@ -152,7 +152,7 @@ CONFIG_SPI_S3C24XX=y > CONFIG_SPI_SPIDEV=y > CONFIG_GPIO_SYSFS=y > CONFIG_SENSORS_LM75=y > -CONFIG_THERMAL=m > +CONFIG_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_S3C2410_WATCHDOG=y > CONFIG_FB=y > diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig > index d4654755b09c..d4f9dda3a52f 100644 > --- a/arch/arm/configs/pxa_defconfig > +++ b/arch/arm/configs/pxa_defconfig > @@ -387,7 +387,7 @@ CONFIG_SENSORS_LM75=m > CONFIG_SENSORS_LM90=m > CONFIG_SENSORS_LM95245=m > CONFIG_SENSORS_NTC_THERMISTOR=m > -CONFIG_THERMAL=m > +CONFIG_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_XILINX_WATCHDOG=m > CONFIG_SA1100_WATCHDOG=m > diff --git a/arch/mips/configs/ip22_defconfig > b/arch/mips/configs/ip22_defconfig > index ff40fbc2f439..21a1168ae301 100644 > --- a/arch/mips/configs/ip22_defconfig > +++ b/arch/mips/configs/ip22_defconfig > @@ -228,7 +228,7 @@ CONFIG_SERIAL_IP22_ZILOG=m > # CONFIG_HW_RANDOM is not set > CONFIG_RAW_DRIVER=m > # CONFIG_HWMON is not set > -CONFIG_THERMAL=m > +CONFIG_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_INDYDOG=m > # CONFIG_VGA_CONSOLE is not set > diff --git a/arch/mips/configs/ip27_defconfig > b/arch/mips/configs/ip27_defconfig > index 81c47e18131b..54db5dedf776 100644 > --- a/arch/mips/configs/ip27_defconfig > +++ b/arch/mips/configs/ip27_defconfig > @@ -271,7 +271,7 @@ CONFIG_I2C_PARPORT_LIGHT=m > CONFIG_I2C_TAOS_EVM=m > CONFIG_I2C_STUB=m > # CONFIG_HWMON is not set > -CONFIG_THERMAL=m > +CONFIG_THERMAL=y > CONFIG_MFD_PCF50633=m > CONFIG_PCF50633_ADC=m > CONFIG_PCF50633_GPIO=m > diff --git a/arch/unicore32/configs/unicore32_defconfig > b/arch/unicore32/configs/unicore32_defconfig > index aebd01fc28e5..360cc9abcdb0 100644 > --- a/arch/unicore32/configs/unicore32_defconfig > +++ b/arch/unicore32/configs/unicore32_defconfig > @@ -119,7 +119,7 @@ CONFIG_I2C_PUV3=y > # Hardware Monitoring support > #CONFIG_SENSORS_LM75=m > # Generic Thermal sysfs driver > -#CONFIG_THERMAL=m > +#CONFIG_THERMAL=y > #CONFIG_THERMAL_HWMON=y > > # Multimedia support > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 653aa27a25a4..ccf5b9408d7a 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -3,7 +3,7 @@ > # > > menuconfig THERMAL > - tristate "Generic Thermal sysfs driver" > + bool "Generic Thermal sysfs driver" > help > Generic Thermal Sysfs driver offers a generic mechanism for > thermal management. Usually it's made up of one or more thermal > @@ -11,7 +11,7 @@ menuconfig THERMAL > Each thermal zone contains its own temperature, trip points, > cooling devices. > All platforms with ACPI thermal support can use this driver. > - If you want this support, you should say Y or M here. > + If you want this support, you should say Y here. > > if THERMAL > > -- > 2.17.1 >
