On 01/04/2019 08:43, Elaine Zhang wrote:
> PX30 SOC has two Temperature Sensors for CPU and GPU.
>
> Signed-off-by: Elaine Zhang <zhangq...@rock-chips.com>
> ---
> drivers/thermal/rockchip_thermal.c | 39
> ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/drivers/thermal/rockchip_thermal.c
> b/drivers/thermal/rockchip_thermal.c
> index faa6c7792155..d5c161e63361 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -225,11 +225,15 @@ struct rockchip_thermal_data {
> #define GRF_TSADC_TESTBIT_L 0x0e648
> #define GRF_TSADC_TESTBIT_H 0x0e64c
>
> +#define PX30_GRF_SOC_CON2 0x0408
> +
> #define GRF_SARADC_TESTBIT_ON (0x10001 << 2)
> #define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2)
> #define GRF_TSADC_VCM_EN_L (0x10001 << 7)
> #define GRF_TSADC_VCM_EN_H (0x10001 << 7)
>
> +#define GRF_CON_TSADC_CH_INV (0x10001 << 1)
> +
> /**
> * struct tsadc_table - code to temperature conversion table
> * @code: the value of adc channel
> @@ -692,6 +696,14 @@ static void rk_tsadcv3_initialize(struct regmap *grf,
> void __iomem *regs,
> regs + TSADCV2_AUTO_CON);
> }
>
> +static void rk_tsadcv4_initialize(struct regmap *grf, void __iomem *regs,
> + enum tshut_polarity tshut_polarity)
> +{
> + rk_tsadcv2_initialize(grf, regs, tshut_polarity);
> + if (!IS_ERR(grf))
Why this test ? grf is not modified by the 'rk_tsadcv2_initialize' function.
> + regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV);
> +}
> +
> static void rk_tsadcv2_irq_ack(void __iomem *regs)
> {
> u32 val;
> @@ -821,6 +833,30 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem
> *regs,
> writel_relaxed(val, regs + TSADCV2_INT_EN);
> }
>
> +static const struct rockchip_tsadc_chip px30_tsadc_data = {
> + .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> + .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> + .chn_num = 2, /* 2 channels for tsadc */
> +
> + .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> + .tshut_temp = 95000,
> +
> + .initialize = rk_tsadcv4_initialize,
> + .irq_ack = rk_tsadcv3_irq_ack,
> + .control = rk_tsadcv3_control,
> + .get_temp = rk_tsadcv2_get_temp,
> + .set_alarm_temp = rk_tsadcv2_alarm_temp,
> + .set_tshut_temp = rk_tsadcv2_tshut_temp,
> + .set_tshut_mode = rk_tsadcv2_tshut_mode,
> +
> + .table = {
> + .id = rk3328_code_table,
> + .length = ARRAY_SIZE(rk3328_code_table),
> + .data_mask = TSADCV2_DATA_MASK,
> + .mode = ADC_INCREMENT,
> + },
> +};
> +
> static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> .chn_num = 1, /* one channel for tsadc */
> @@ -993,6 +1029,9 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem
> *regs,
> };
>
> static const struct of_device_id of_rockchip_thermal_match[] = {
> + { .compatible = "rockchip,px30-tsadc",
> + .data = (void *)&px30_tsadc_data,
> + },
> {
> .compatible = "rockchip,rv1108-tsadc",
> .data = (void *)&rv1108_tsadc_data,
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
