On 4/10/19 12:47 PM, Flavio Suligoi wrote:
Add an info message for the PXA2xx device driver start-up,
with the indication of:
- mode (slave device or master controller)
- transfer mode (DMA or GPIO)
Signed-off-by: Flavio Suligoi <f.suli...@asem.it>
---
v1: - first version
v2: - remove warning message "no DMA channels available, using PIO"
- add "slave device"/"master controller" indication message
drivers/spi/spi-pxa2xx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f7068cc..b9e04e2 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1696,7 +1696,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
if (platform_info->enable_dma) {
status = pxa2xx_spi_dma_setup(drv_data);
if (status) {
- dev_warn(dev, "no DMA channels available, using PIO\n");
platform_info->enable_dma = false;
} else {
controller->can_dma = pxa2xx_spi_can_dma;
@@ -1818,6 +1817,10 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+ dev_info(dev, "PXA2xx SPI %s (%s mode)\n",
+ platform_info->is_slave ? "slave device" : "master controller",
+ platform_info->enable_dma ? "DMA" : "PIO");
+
"slave device" is ambiguous. Please use "controller" with both, i.e.
"PXA2xx SPI %s controller (%s mode)\n", ... ? "slave" : "master", ...
With that changed you may add:
Reviewed-by: Jarkko Nikula <jarkko.nik...@linux.intel.com>
