From: Bartosz Golaszewski <bgolaszew...@baylibre.com>

Add the DT binding document for the LEDs module of max77650.

Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
Reviewed-by: Rob Herring <r...@kernel.org>
Acked-by: Pavel Machek <pa...@ucw.cz>
---
 .../bindings/leds/leds-max77650.txt           | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-max77650.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt 
b/Documentation/devicetree/bindings/leds/leds-max77650.txt
new file mode 100644
index 000000000000..3a67115cc1da
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt
@@ -0,0 +1,57 @@
+LED driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The LED controller is represented as a sub-node of the PMIC node on
+the device tree.
+
+This device has three current sinks.
+
+Required properties:
+--------------------
+- compatible:          Must be "maxim,max77650-led"
+- #address-cells:      Must be <1>.
+- #size-cells:         Must be <0>.
+
+Each LED is represented as a sub-node of the LED-controller node. Up to
+three sub-nodes can be defined.
+
+Required properties of the sub-node:
+------------------------------------
+
+- reg:                 Must be <0>, <1> or <2>.
+
+Optional properties of the sub-node:
+------------------------------------
+
+- label:               See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt
+
+For more details, please refer to the generic GPIO DT binding document
+<devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+       leds {
+               compatible = "maxim,max77650-led";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               led@0 {
+                       reg = <0>;
+                       label = "blue:usr0";
+               };
+
+               led@1 {
+                       reg = <1>;
+                       label = "red:usr1";
+                       linux,default-trigger = "heartbeat";
+               };
+
+               led@2 {
+                       reg = <2>;
+                       label = "green:usr2";
+               };
+       };
-- 
2.21.0

Reply via email to