Hi Bjorn, Thanks a lot for your comments!
> -----Original Message----- > From: Bjorn Helgaas [mailto:[email protected]] > Sent: 2019年4月12日 22:01 > To: Z.q. Hou <[email protected]> > Cc: [email protected]; [email protected]; > [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; Leo Li <[email protected]>; > [email protected]; [email protected]; > [email protected]; Mingkai Hu <[email protected]>; M.h. Lian > <[email protected]>; Xiaowei Bao <[email protected]> > Subject: [EXT] Re: [PATCHv5 4/6] PCI: mobiveil: Add PCIe Gen4 RC driver for > NXP Layerscape SoCs > > WARNING: This email was created outside of NXP. DO NOT CLICK links or > attachments unless you recognize the sender and know the content is safe. > > > > On Fri, Apr 12, 2019 at 09:52:50AM +0000, Z.q. Hou wrote: > > From: Hou Zhiqiang <[email protected]> > > > > This PCIe controller is based on the Mobiveil GPEX IP, which is > > compatible with the PCI Express™ Base Specification, Revision 4.0. > > > > Signed-off-by: Hou Zhiqiang <[email protected]> > > Reviewed-by: Minghuan Lian <[email protected]> > > --- > > V5: > > - Corrected the subject. > > - Corrected 2 typos. > > - Updated the Copyright and driver description. > > - Changed to use BIT(x) to define verious functions of register's bits. > > - Unified the capitalization of error info. > > - Changed the IRQ handler name to ls_pcie_g4_isr(). > > - Change 'irq' to 'IRQ' in error info. > > - Trimmed some functions without functionality change. > > > > drivers/pci/controller/mobiveil/Kconfig | 10 + > > drivers/pci/controller/mobiveil/Makefile | 1 + > > > .../controller/mobiveil/pci-layerscape-gen4.c | 256 > > ++++++++++++++++++ > > I would probably name this "pcie-layerscape-gen4.c" ("pcie" instead of "pci"), > since that's more typical and this really is PCIe-specific. Yes, this can be arranged in v6. > > > +#define PCIE_PF_DBG 0x7fc > > +#define PF_DBG_LTSSM_MASK 0x3f > > +#define PF_DBG_WE BIT(31) > > +#define PF_DBG_PABR BIT(27) > > + > > +#define LS_PCIE_G4_LTSSM_L0 0x2d /* L0 state */ > > Maybe rename this and move it to make it obvious that it's related to > PF_DBG_LTSSM_MASK? Yes, will rename it in v6. > > > + dev_err(dev, "Poll PABRST&PABACT timeout.\n"); > > No need for punctuation at end of messages. Will remove them in v6. Thanks, Zhiqiang
