When using devicetree for configuration, interrupt trigger type
should be described in the dts file, not hard-coded in the C code.

The mtk-sd silicon in the mt7621 soc uses an active-high interrupt
and so cannot be used with the current code.

So remove the trigger and leave it to be set from devicetree.

Signed-off-by: NeilBrown <n...@brown.name>
---
 drivers/mmc/host/mtk-sd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 4492a4465c0e..14e048239143 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2243,7 +2243,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
        msdc_init_hw(host);
 
        ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq,
-               IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name, host);
+                              0, pdev->name, host);
        if (ret)
                goto release;
 


Reply via email to