Hi Dmitry,
I already replied against patch6 about the exception handling
of tegra_devfreq_probe(). This patchset split out the patch
related to error handling for probe(). I think that you can
squash the patches regarding of exception handling for probe()
to one patch instead of split out the multiple patches.
On 19. 4. 15. 오후 11:54, Dmitry Osipenko wrote:
> Reset hardware, disable ACTMON clock, release OPP's and free IRQ before
> removing devfreq device since there is no guarantee that interrupt
> handling won't run after masking interrupt in hardware.
>
> Signed-off-by: Dmitry Osipenko <dig...@gmail.com>
> ---
> drivers/devfreq/tegra-devfreq.c | 53 ++++++++++++++++-----------------
> 1 file changed, 26 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c
> index 69b557df5084..a668e4fbc874 100644
> --- a/drivers/devfreq/tegra-devfreq.c
> +++ b/drivers/devfreq/tegra-devfreq.c
> @@ -663,28 +663,28 @@ static int tegra_devfreq_probe(struct platform_device
> *pdev)
>
> irq = platform_get_irq(pdev, 0);
> if (irq < 0) {
> - dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
> - return irq;
> + err = irq;
> + dev_err(&pdev->dev, "Failed to get IRQ: %d\n", err);
> + goto remove_opps;
> }
>
> platform_set_drvdata(pdev, tegra);
>
> tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
> - tegra->devfreq = devm_devfreq_add_device(&pdev->dev,
> - &tegra_devfreq_profile,
> - "tegra_actmon",
> - NULL);
> + tegra->devfreq = devfreq_add_device(&pdev->dev,
> + &tegra_devfreq_profile,
> + "tegra_actmon",
> + NULL);
> if (IS_ERR(tegra->devfreq)) {
> err = PTR_ERR(tegra->devfreq);
> - return err;
> + goto remove_opps;
> }
>
> - err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> - actmon_thread_isr, IRQF_ONESHOT,
> - "tegra-devfreq", tegra);
> + err = request_threaded_irq(irq, NULL, actmon_thread_isr, IRQF_ONESHOT,
> + "tegra-devfreq", tegra);
> if (err) {
> dev_err(&pdev->dev, "Interrupt request failed\n");
> - goto remove_opps;
> + goto remove_devfreq;
> }
>
> tegra->rate_change_nb.notifier_call = tegra_actmon_rate_notify_cb;
> @@ -692,14 +692,23 @@ static int tegra_devfreq_probe(struct platform_device
> *pdev)
> if (err) {
> dev_err(&pdev->dev,
> "Failed to register rate change notifier\n");
> - goto remove_opps;
> + goto disable_interrupt;
> }
>
> return 0;
>
> +disable_interrupt:
> + free_irq(irq, tegra);
> +
> +remove_devfreq:
> + devfreq_remove_device(tegra->devfreq);
> +
> remove_opps:
> dev_pm_opp_remove_all_dynamic(&pdev->dev);
>
> + reset_control_reset(tegra->reset);
> + clk_disable_unprepare(tegra->clock);
> +
> return err;
> }
>
> @@ -707,24 +716,14 @@ static int tegra_devfreq_remove(struct platform_device
> *pdev)
> {
> struct tegra_devfreq *tegra = platform_get_drvdata(pdev);
> int irq = platform_get_irq(pdev, 0);
> - u32 val;
> - unsigned int i;
> -
> - devm_devfreq_remove_device(&pdev->dev, tegra->devfreq);
> - dev_pm_opp_remove_all_dynamic(&pdev->dev);
> -
> - for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++) {
> - val = device_readl(&tegra->devices[i], ACTMON_DEV_CTRL);
> - val &= ~ACTMON_DEV_CTRL_ENB;
> - device_writel(&tegra->devices[i], val, ACTMON_DEV_CTRL);
> - }
> -
> - actmon_write_barrier(tegra);
> -
> - devm_free_irq(&pdev->dev, irq, tegra);
>
> clk_notifier_unregister(tegra->emc_clock, &tegra->rate_change_nb);
> + free_irq(irq, tegra);
> +
> + devfreq_remove_device(tegra->devfreq);
> + dev_pm_opp_remove_all_dynamic(&pdev->dev);
>
> + reset_control_reset(tegra->reset);
> clk_disable_unprepare(tegra->clock);
>
> return 0;
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
