On Mon, Mar 25, 2019 at 03:09:43PM +0530, Kishon Vijay Abraham I wrote:
> Add PCIe EP support for AM654x Platforms in pci-keystone.c
> 
> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
> ---
>  drivers/pci/controller/dwc/Kconfig        |  23 +-
>  drivers/pci/controller/dwc/pci-keystone.c | 242 +++++++++++++++++++---
>  2 files changed, 236 insertions(+), 29 deletions(-)

Hi Kishon,

WARNING: DT compatible string "ti,am654-pcie-ep" appears un-documented -- check 
/work/sandbox/pci/Documentation/devicetree/bindings/
#301: FILE: drivers/pci/controller/dwc/pci-keystone.c:1179:
+               .compatible = "ti,am654-pcie-ep",

I would like this warning to be fixed please on this patch.

Thanks,
Lorenzo

> diff --git a/drivers/pci/controller/dwc/Kconfig 
> b/drivers/pci/controller/dwc/Kconfig
> index d1d00833e0b3..b450ad2823a5 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -105,14 +105,33 @@ config PCIE_SPEAR13XX
>  config PCI_KEYSTONE
>       bool "TI Keystone PCIe controller"
>       depends on ARCH_KEYSTONE || ARCH_K3 || ((ARM || ARM64) && COMPILE_TEST)
> -     depends on PCI_MSI_IRQ_DOMAIN
> -     select PCIE_DW_HOST
>       help
>         Say Y here if you want to enable PCI controller support on Keystone
>         SoCs. The PCI controller on Keystone is based on DesignWare hardware
>         and therefore the driver re-uses the DesignWare core functions to
>         implement the driver.
>  
> +if PCI_KEYSTONE
> +
> +config PCI_KEYSTONE_HOST
> +     bool "PCI Keystone Host Mode"
> +     depends on PCI_MSI_IRQ_DOMAIN
> +     select PCIE_DW_HOST
> +     default y
> +     help
> +      Enables support for the PCIe controller in the Keystone SoC to work in
> +      host mode.
> +
> +config PCI_KEYSTONE_EP
> +     bool "PCI Keystone Endpoint Mode"
> +     depends on PCI_ENDPOINT
> +     select PCIE_DW_EP
> +     help
> +      Enables support for the PCIe controller in the Keystone SoC to work in
> +      endpoint mode.
> +
> +endif
> +
>  config PCI_LAYERSCAPE
>       bool "Freescale Layerscape PCIe controller"
>       depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> diff --git a/drivers/pci/controller/dwc/pci-keystone.c 
> b/drivers/pci/controller/dwc/pci-keystone.c
> index 312fd0c49bbb..459485b0f65d 100644
> --- a/drivers/pci/controller/dwc/pci-keystone.c
> +++ b/drivers/pci/controller/dwc/pci-keystone.c
> @@ -52,6 +52,12 @@
>  #define OB_ENABLEN                   BIT(0)
>  #define OB_WIN_SIZE                  8       /* 8MB */
>  
> +#define PCIE_LEGACY_IRQ_ENABLE_SET(n)        (0x188 + (0x10 * ((n) - 1)))
> +#define PCIE_LEGACY_IRQ_ENABLE_CLR(n)        (0x18c + (0x10 * ((n) - 1)))
> +#define PCIE_EP_IRQ_SET                      0x64
> +#define PCIE_EP_IRQ_CLR                      0x68
> +#define INT_ENABLE                   BIT(0)
> +
>  /* IRQ register defines */
>  #define IRQ_EOI                              0x050
>  
> @@ -95,11 +101,16 @@
>  #define KS_PCIE_SYSCLOCKOUTEN                BIT(0)
>  
>  #define AM654_PCIE_DEV_TYPE_MASK     0x3
> +#define AM654_WIN_SIZE                       SZ_64K
> +
> +#define APP_ADDR_SPACE_0             (16 * SZ_1K)
>  
>  #define to_keystone_pcie(x)          dev_get_drvdata((x)->dev)
>  
>  struct ks_pcie_of_data {
> +     enum dw_pcie_device_mode mode;
>       const struct dw_pcie_host_ops *host_ops;
> +     const struct dw_pcie_ep_ops *ep_ops;
>       unsigned int version;
>  };
>  
> @@ -877,12 +888,139 @@ static int __init ks_pcie_add_pcie_port(struct 
> keystone_pcie *ks_pcie,
>       return 0;
>  }
>  
> +static u32 ks_pcie_am654_read_dbi2(struct dw_pcie *pci, void __iomem *base,
> +                                u32 reg, size_t size)
> +{
> +     struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
> +     u32 val;
> +
> +     ks_pcie_set_dbi_mode(ks_pcie);
> +     dw_pcie_read(base + reg, size, &val);
> +     ks_pcie_clear_dbi_mode(ks_pcie);
> +     return val;
> +}
> +
> +static void ks_pcie_am654_write_dbi2(struct dw_pcie *pci, void __iomem *base,
> +                                  u32 reg, size_t size, u32 val)
> +{
> +     struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
> +
> +     ks_pcie_set_dbi_mode(ks_pcie);
> +     dw_pcie_write(base + reg, size, val);
> +     ks_pcie_clear_dbi_mode(ks_pcie);
> +}
> +
>  static const struct dw_pcie_ops ks_pcie_dw_pcie_ops = {
>       .start_link = ks_pcie_start_link,
>       .stop_link = ks_pcie_stop_link,
>       .link_up = ks_pcie_link_up,
> +     .read_dbi2 = ks_pcie_am654_read_dbi2,
> +     .write_dbi2 = ks_pcie_am654_write_dbi2,
>  };
>  
> +static void ks_pcie_am654_ep_init(struct dw_pcie_ep *ep)
> +{
> +     struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +     int flags;
> +
> +     ep->page_size = AM654_WIN_SIZE;
> +     flags = PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_32;
> +     dw_pcie_writel_dbi2(pci, PCI_BASE_ADDRESS_0, APP_ADDR_SPACE_0 - 1);
> +     dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, flags);
> +}
> +
> +static void ks_pcie_am654_raise_legacy_irq(struct keystone_pcie *ks_pcie)
> +{
> +     struct dw_pcie *pci = ks_pcie->pci;
> +     u8 int_pin;
> +
> +     int_pin = dw_pcie_readb_dbi(pci, PCI_INTERRUPT_PIN);
> +     if (int_pin == 0 || int_pin > 4)
> +             return;
> +
> +     ks_pcie_app_writel(ks_pcie, PCIE_LEGACY_IRQ_ENABLE_SET(int_pin),
> +                        INT_ENABLE);
> +     ks_pcie_app_writel(ks_pcie, PCIE_EP_IRQ_SET, INT_ENABLE);
> +     mdelay(1);
> +     ks_pcie_app_writel(ks_pcie, PCIE_EP_IRQ_CLR, INT_ENABLE);
> +     ks_pcie_app_writel(ks_pcie, PCIE_LEGACY_IRQ_ENABLE_CLR(int_pin),
> +                        INT_ENABLE);
> +}
> +
> +static int ks_pcie_am654_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> +                                enum pci_epc_irq_type type,
> +                                u16 interrupt_num)
> +{
> +     struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +     struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
> +
> +     switch (type) {
> +     case PCI_EPC_IRQ_LEGACY:
> +             ks_pcie_am654_raise_legacy_irq(ks_pcie);
> +             break;
> +     case PCI_EPC_IRQ_MSI:
> +             dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> +             break;
> +     default:
> +             dev_err(pci->dev, "UNKNOWN IRQ type\n");
> +             return -EINVAL;
> +     }
> +
> +     return 0;
> +}
> +
> +static const struct pci_epc_features ks_pcie_am654_epc_features = {
> +     .linkup_notifier = false,
> +     .msi_capable = true,
> +     .msix_capable = false,
> +     .reserved_bar = 1 << BAR_0 | 1 << BAR_1,
> +     .bar_fixed_64bit = 1 << BAR_0,
> +     .bar_fixed_size[2] = SZ_1M,
> +     .bar_fixed_size[3] = SZ_64K,
> +     .bar_fixed_size[4] = 256,
> +     .bar_fixed_size[5] = SZ_1M,
> +     .align = SZ_1M,
> +};
> +
> +static const struct pci_epc_features*
> +ks_pcie_am654_get_features(struct dw_pcie_ep *ep)
> +{
> +     return &ks_pcie_am654_epc_features;
> +}
> +
> +static const struct dw_pcie_ep_ops ks_pcie_am654_ep_ops = {
> +     .ep_init = ks_pcie_am654_ep_init,
> +     .raise_irq = ks_pcie_am654_raise_irq,
> +     .get_features = &ks_pcie_am654_get_features,
> +};
> +
> +static int __init ks_pcie_add_pcie_ep(struct keystone_pcie *ks_pcie,
> +                                   struct platform_device *pdev)
> +{
> +     int ret;
> +     struct dw_pcie_ep *ep;
> +     struct resource *res;
> +     struct device *dev = &pdev->dev;
> +     struct dw_pcie *pci = ks_pcie->pci;
> +
> +     ep = &pci->ep;
> +
> +     res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> +     if (!res)
> +             return -EINVAL;
> +
> +     ep->phys_base = res->start;
> +     ep->addr_size = resource_size(res);
> +
> +     ret = dw_pcie_ep_init(ep);
> +     if (ret) {
> +             dev_err(dev, "failed to initialize endpoint\n");
> +             return ret;
> +     }
> +
> +     return 0;
> +}
> +
>  static void ks_pcie_disable_phy(struct keystone_pcie *ks_pcie)
>  {
>       int num_lanes = ks_pcie->num_lanes;
> @@ -950,7 +1088,8 @@ static int ks_pcie_set_mode(struct device *dev)
>       return 0;
>  }
>  
> -static int ks_pcie_am654_set_mode(struct device *dev)
> +static int ks_pcie_am654_set_mode(struct device *dev,
> +                               enum dw_pcie_device_mode mode)
>  {
>       struct device_node *np = dev->of_node;
>       struct regmap *syscon;
> @@ -963,7 +1102,18 @@ static int ks_pcie_am654_set_mode(struct device *dev)
>               return 0;
>  
>       mask = AM654_PCIE_DEV_TYPE_MASK;
> -     val = RC;
> +
> +     switch (mode) {
> +     case DW_PCIE_RC_TYPE:
> +             val = RC;
> +             break;
> +     case DW_PCIE_EP_TYPE:
> +             val = EP;
> +             break;
> +     default:
> +             dev_err(dev, "INVALID device type %d\n", mode);
> +             return -EINVAL;
> +     }
>  
>       ret = regmap_update_bits(syscon, 0, mask, val);
>       if (ret) {
> @@ -1006,6 +1156,13 @@ static const struct ks_pcie_of_data ks_pcie_rc_of_data 
> = {
>  
>  static const struct ks_pcie_of_data ks_pcie_am654_rc_of_data = {
>       .host_ops = &ks_pcie_am654_host_ops,
> +     .mode = DW_PCIE_RC_TYPE,
> +     .version = 0x490A,
> +};
> +
> +static const struct ks_pcie_of_data ks_pcie_am654_ep_of_data = {
> +     .ep_ops = &ks_pcie_am654_ep_ops,
> +     .mode = DW_PCIE_EP_TYPE,
>       .version = 0x490A,
>  };
>  
> @@ -1019,16 +1176,22 @@ static const struct of_device_id ks_pcie_of_match[] = 
> {
>               .data = &ks_pcie_am654_rc_of_data,
>               .compatible = "ti,am654-pcie-rc",
>       },
> +     {
> +             .data = &ks_pcie_am654_ep_of_data,
> +             .compatible = "ti,am654-pcie-ep",
> +     },
>       { },
>  };
>  
>  static int __init ks_pcie_probe(struct platform_device *pdev)
>  {
>       const struct dw_pcie_host_ops *host_ops;
> +     const struct dw_pcie_ep_ops *ep_ops;
>       struct device *dev = &pdev->dev;
>       struct device_node *np = dev->of_node;
>       const struct ks_pcie_of_data *data;
>       const struct of_device_id *match;
> +     enum dw_pcie_device_mode mode;
>       struct dw_pcie *pci;
>       struct keystone_pcie *ks_pcie;
>       struct device_link **link;
> @@ -1053,6 +1216,8 @@ static int __init ks_pcie_probe(struct platform_device 
> *pdev)
>  
>       version = data->version;
>       host_ops = data->host_ops;
> +     ep_ops = data->ep_ops;
> +     mode = data->mode;
>  
>       ks_pcie = devm_kzalloc(dev, sizeof(*ks_pcie), GFP_KERNEL);
>       if (!ks_pcie)
> @@ -1078,16 +1243,11 @@ static int __init ks_pcie_probe(struct 
> platform_device *pdev)
>               ks_pcie->is_am6 = true;
>  
>       pci->dbi_base = base;
> +     pci->dbi_base2 = base;
>       pci->dev = dev;
>       pci->ops = &ks_pcie_dw_pcie_ops;
>       pci->version = version;
>  
> -     ret = of_property_read_u32(np, "num-viewport", &num_viewport);
> -     if (ret < 0) {
> -             dev_err(dev, "unable to read *num-viewport* property\n");
> -             return ret;
> -     }
> -
>       irq = platform_get_irq(pdev, 0);
>       if (irq < 0) {
>               dev_err(dev, "missing IRQ resource: %d\n", irq);
> @@ -1136,7 +1296,6 @@ static int __init ks_pcie_probe(struct platform_device 
> *pdev)
>       ks_pcie->pci = pci;
>       ks_pcie->link = link;
>       ks_pcie->num_lanes = num_lanes;
> -     ks_pcie->num_viewport = num_viewport;
>       ks_pcie->phy = phy;
>  
>       gpiod = devm_gpiod_get_optional(dev, "reset",
> @@ -1172,7 +1331,7 @@ static int __init ks_pcie_probe(struct platform_device 
> *pdev)
>  
>               pci->atu_base = atu_base;
>  
> -             ret = ks_pcie_am654_set_mode(dev);
> +             ret = ks_pcie_am654_set_mode(dev, mode);
>               if (ret < 0)
>                       goto err_get_sync;
>       } else {
> @@ -1181,29 +1340,58 @@ static int __init ks_pcie_probe(struct 
> platform_device *pdev)
>                       goto err_get_sync;
>       }
>  
> -     /*
> -      * "Power Sequencing and Reset Signal Timings" table in
> -      * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 2.0
> -      * indicates PERST# should be deasserted after minimum of 100us
> -      * once REFCLK is stable. The REFCLK to the connector in RC
> -      * mode is selected while enabling the PHY. So deassert PERST#
> -      * after 100 us.
> -      */
> -     if (gpiod) {
> -             usleep_range(100, 200);
> -             gpiod_set_value_cansleep(gpiod, 1);
> -     }
> -
>       link_speed = of_pci_get_max_link_speed(np);
>       if (link_speed < 0)
>               link_speed = 2;
>  
>       ks_pcie_set_link_speed(pci, link_speed);
>  
> -     pci->pp.ops = host_ops;
> -     ret = ks_pcie_add_pcie_port(ks_pcie, pdev);
> -     if (ret < 0)
> -             goto err_get_sync;
> +     switch (mode) {
> +     case DW_PCIE_RC_TYPE:
> +             if (!IS_ENABLED(CONFIG_PCI_KEYSTONE_HOST)) {
> +                     ret = -ENODEV;
> +                     goto err_get_sync;
> +             }
> +
> +             ret = of_property_read_u32(np, "num-viewport", &num_viewport);
> +             if (ret < 0) {
> +                     dev_err(dev, "unable to read *num-viewport* 
> property\n");
> +                     return ret;
> +             }
> +
> +             /*
> +              * "Power Sequencing and Reset Signal Timings" table in
> +              * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 2.0
> +              * indicates PERST# should be deasserted after minimum of 100us
> +              * once REFCLK is stable. The REFCLK to the connector in RC
> +              * mode is selected while enabling the PHY. So deassert PERST#
> +              * after 100 us.
> +              */
> +             if (gpiod) {
> +                     usleep_range(100, 200);
> +                     gpiod_set_value_cansleep(gpiod, 1);
> +             }
> +
> +             ks_pcie->num_viewport = num_viewport;
> +             pci->pp.ops = host_ops;
> +             ret = ks_pcie_add_pcie_port(ks_pcie, pdev);
> +             if (ret < 0)
> +                     goto err_get_sync;
> +             break;
> +     case DW_PCIE_EP_TYPE:
> +             if (!IS_ENABLED(CONFIG_PCI_KEYSTONE_EP)) {
> +                     ret = -ENODEV;
> +                     goto err_get_sync;
> +             }
> +
> +             pci->ep.ops = ep_ops;
> +             ret = ks_pcie_add_pcie_ep(ks_pcie, pdev);
> +             if (ret < 0)
> +                     goto err_get_sync;
> +             break;
> +     default:
> +             dev_err(dev, "INVALID device type %d\n", mode);
> +     }
>  
>       ks_pcie_enable_error_irq(ks_pcie);
>  
> -- 
> 2.17.1
> 

Reply via email to