On Tue, Apr 23, 2019 at 04:18:13PM +0530, Vignesh Raghavendra wrote:
> Add binding documentation for TI's HyperBus memory controller present on
> AM654 SoC.
> 
> Signed-off-by: Vignesh Raghavendra <[email protected]>
> ---
>  .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 32 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt 
> b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> new file mode 100644
> index 000000000000..fc87c7918389
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> @@ -0,0 +1,32 @@
> +Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
> +
> +Required properties:
> +- compatible : "ti,am654-hbmc" for AM654 SoC
> +- reg : Two entries:
> +     First entry pointed to the register space of HBMC controller
> +     Second entry pointing to the memory map region dedicated for
> +     MMIO access to attached flash devices
> +- ranges : Address range allocated for each chipselect in the MMIO space
> +
> +Optional properties:
> +- mux-controls : phandle to the multiplexer that controls selection of
> +              HBMC vs OSPI. Mux state of 1 indicates HBMC is selected.

So 1 is also the default because your example doesn't have the property?

> +
> +Example:
> +
> +     hbmc: hbmc@47034000 {
> +             compatible = "ti,am654-hbmc";
> +             reg = <0x0 0x47034000 0x0 0x100>,
> +                     <0x5 0x00000000 0x1 0x0000000>;
> +             power-domains = <&k3_pds 55>;
> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +             ranges = <0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
> +                      <0x1 0x5 0x04000000 0x4000000>; /* CS1 - 64MB

This is wrong. You need 2 cells for the child address. The first cell is 
the CS and the 2nd cell is the offset (typically 0). Otherwise you have 
overlapping addresses with child addresses 0 and 1.

> +
> +             /* Slave flash node */
> +             flash@0 {

And then the unit-address here would be '0,0'.

> +                     compatible = "cypress,hyperflash";

Doesn't match what you defined for this binding.

> +                     reg = <0x0 0x4000000>;
> +             };
> +     };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a5f22f85c848..1ade81f9a32a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7258,6 +7258,7 @@ S:      Supported
>  F:   drivers/mtd/hyperbus/
>  F:   include/linux/mtd/hyperbus.h
>  F:   Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
> +F:   Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
>  
>  HYPERVISOR VIRTUAL CONSOLE DRIVER
>  L:   [email protected]
> -- 
> 2.21.0
> 

Reply via email to