On Tue, Apr 23, 2019 at 11:03 AM Jerome Brunet <[email protected]> wrote: > > Use signal resampling tuning for the UHS and HS200 modes. > Instead of trying to get the *best* resampling setting with complex > window calculation, we just stop on the first working setting. > > If the tuning setting later proves unstable, we will just continue the > tuning where we left it. > > Signed-off-by: Jerome Brunet <[email protected]> [Khadas VIM now shows the HS200 eMMC] Tested-by: Martin Blumenstingl <[email protected]>
BEFORE (no patches from this series applied): # dmesg | grep mmc1 (no output) AFTER (all 7 patches from this series applied): # dmesg | grep mmc1 [ 2.945155] mmc1: new HS200 MMC card at address 0001 [ 2.957737] mmcblk1: mmc1:0001 AWPD3R 14.6 GiB [ 2.966278] mmcblk1boot0: mmc1:0001 AWPD3R partition 1 4.00 MiB [ 2.976114] mmcblk1boot1: mmc1:0001 AWPD3R partition 2 4.00 MiB [ 2.986354] mmcblk1rpmb: mmc1:0001 AWPD3R partition 3 4.00 MiB, chardev (241:0) Regards Martin
