The Allwinner H6 SoC features tweakable VCC for PC, PD, PG, PL and PM
banks.

This patch adds supplies for these banks except PL bank. PL bank is
where PMIC is attached, and currently if a PMIC regulator is added
for it a dependency loop will happen.

Signed-off-by: Icenowy Zheng <[email protected]>
---
Changes in v2:
- Added PG/PM banks.

 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 4802902e128f..9e464d40cbff 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -127,6 +127,12 @@
        status = "okay";
 };
 
+&pio {
+       vcc-pc-supply = <&reg_bldo2>;
+       vcc-pd-supply = <&reg_cldo1>;
+       vcc-pg-supply = <&reg_aldo1>;
+};
+
 &r_i2c {
        status = "okay";
 
@@ -247,6 +253,10 @@
        };
 };
 
+&r_pio {
+       vcc-pm-supply = <&reg_aldo1>;
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_ph_pins>;
-- 
2.18.1

Reply via email to