On 4/16/19 11:30 AM, Stu Hsieh wrote:
> This patch add the function for Get/Set PARM for application.
>
> Application can get the information about number of link.
>
> Signed-off-by: Stu Hsieh <[email protected]>
> ---
> .../media/platform/mtk-mipicsi/mtk_mipicsi.c | 34 +++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
> b/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
> index 5e4028d0d5e1..5db9c68b0da9 100644
> --- a/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
> +++ b/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
> @@ -346,6 +346,38 @@ static int get_subdev_link(const struct
> soc_camera_device *icd,
> return 0;
> }
>
> +static int mtk_mipicsi_get_parm(struct soc_camera_device *icd,
> + struct v4l2_streamparm *a)
> +{
> + unsigned int link = 0U;
> + u8 link_reg_val = 0x0U;
> + int ret = 0;
> +
> + /*get camera link number*/
> + ret = get_subdev_link(icd, &link, &link_reg_val);
> + if (ret < 0)
> + return ret;
> +
> + a->parm.capture.timeperframe.numerator = 1;
> + a->parm.capture.timeperframe.denominator = 30;
> + a->parm.capture.reserved[0] = link_reg_val;
> + a->parm.capture.reserved[1] = (u32)(icd->use_count);
No, no, don't use G/S_PARM for that. It's an awful API and other than
getting/setting the frame period it shouldn't be used for anything else.
I've CC-ed Sakari, he is the CSI specialist. I think some work was done
(or is in progress) regarding providing more CSI lane information.
> + dev_info(icd->parent, "use count %d\n", icd->use_count);
> +
> + return 0;
> +}
> +
> +static int mtk_mipicsi_set_param(struct soc_camera_device *icd,
> + struct v4l2_streamparm *a)
> +{
> + struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
> +
> + if (ici->ops->get_parm == NULL)
> + return ici->ops->get_parm(icd, a);
This clearly was never tested since ici->ops->get_parm is NULL when
you call it. I'd drop this function altogether since there is no
point if you can make changes.
Regards,
Hans
> +
> + return 0;
> +}
> +
> static u32 get_bytesperline(const u32 fmt, const u32 width)
> {
> u32 bytesperline = 0;
> @@ -884,6 +916,8 @@ static struct soc_camera_host_ops mtk_soc_camera_host_ops
> = {
> .poll = vb2_fop_poll,
> .querycap = mtk_mipicsi_querycap,
> .set_bus_param = mtk_mipicsi_set_bus_param,
> + .get_parm = mtk_mipicsi_get_parm,
> + .set_parm = mtk_mipicsi_set_param,
> };
>
> static void mtk_mipicsi_ana_init(void __iomem *base)
>
