On Fri, May 10, 2019 at 01:00:24PM +0000, Pramod Kumar wrote:
> add micron nor flash support for ls1046a frwy board.
>
> Signed-off-by: Ashish Kumar <[email protected]>
> Signed-off-by: Pramod Kumar <[email protected]>
Prefix 'arm64: dts: frwy-ls1046a: ...' would be good enough.
> ---
> .../boot/dts/freescale/fsl-ls1046a-frwy.dts | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> index de0d19c02944..890f07122dd0 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> @@ -113,6 +113,23 @@
>
> };
>
> +
Unnecessary newline.
Shawn
> +&qspi {
> + num-cs = <1>;
> + bus-num = <0>;
> + status = "okay";
> +
> + qflash0: flash@0 {
> + compatible = "jedec,spi-nor";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <50000000>;
> + reg = <0>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> + };
> +};
> +
> #include "fsl-ls1046-post.dtsi"
>
> &fman0 {
> --
> 2.17.1
>
