Hello Clément,
On Tue, May 28, 2019 at 06:14:38PM +0200, Clément Péron wrote:
> Allwinner H6 IR is similar to A31 and can use same driver.
>
> Add support for it.
>
> Signed-off-by: Clément Péron <peron.c...@gmail.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index 16c5c3d0fd81..649cbdfe452e 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -647,6 +647,25 @@
> pins = "PL0", "PL1";
> function = "s_i2c";
> };
> +
> + r_ir_rx_pin: r-ir-rx-pin {
> + pins = "PL9";
> + function = "s_cir_rx";
> + };
> + };
> +
> + r_ir: ir@7040000 {
> + compatible = "allwinner,sun50i-h6-ir",
> + "allwinner,sun6i-a31-ir";
> + reg = <0x07040000 0x400>;
> + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&r_ccu CLK_R_APB1_IR>,
> + <&r_ccu CLK_IR>;
> + clock-names = "apb", "ir";
> + resets = <&r_ccu RST_R_APB1_IR>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&r_ir_rx_pin>;
> + status = "disabled";
> };
Please make a comment here, that this is known broken on some boards and may
result IRQ flood if enabled. Otherwise noone will know.
thanks,
o.
> r_i2c: i2c@7081400 {
> --
> 2.20.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
