On 20/05/19 1:11 PM, Baolin Wang wrote:
> For the Spreadtrum SC9860 platform, we should enable another gate clock
> '2x_enable' to make the SD host controller work well.
> 
> Signed-off-by: Baolin Wang <[email protected]>

Acked-by: Adrian Hunter <[email protected]>

> ---
>  drivers/mmc/host/sdhci-sprd.c |   35 +++++++++++++++++++++++++++++------
>  1 file changed, 29 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> index e741491..31ba7d6 100644
> --- a/drivers/mmc/host/sdhci-sprd.c
> +++ b/drivers/mmc/host/sdhci-sprd.c
> @@ -60,6 +60,7 @@ struct sdhci_sprd_host {
>       u32 version;
>       struct clk *clk_sdio;
>       struct clk *clk_enable;
> +     struct clk *clk_2x_enable;
>       u32 base_rate;
>       int flags; /* backup of host attribute */
>  };
> @@ -364,6 +365,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
>       }
>       sprd_host->clk_enable = clk;
>  
> +     clk = devm_clk_get(&pdev->dev, "2x_enable");
> +     if (!IS_ERR(clk))
> +             sprd_host->clk_2x_enable = clk;
> +
>       ret = clk_prepare_enable(sprd_host->clk_sdio);
>       if (ret)
>               goto pltfm_free;
> @@ -372,6 +377,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
>       if (ret)
>               goto clk_disable;
>  
> +     ret = clk_prepare_enable(sprd_host->clk_2x_enable);
> +     if (ret)
> +             goto clk_disable2;
> +
>       sdhci_sprd_init_config(host);
>       host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
>       sprd_host->version = ((host->version & SDHCI_VENDOR_VER_MASK) >>
> @@ -408,6 +417,9 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
>       pm_runtime_disable(&pdev->dev);
>       pm_runtime_set_suspended(&pdev->dev);
>  
> +     clk_disable_unprepare(sprd_host->clk_2x_enable);
> +
> +clk_disable2:
>       clk_disable_unprepare(sprd_host->clk_enable);
>  
>  clk_disable:
> @@ -427,6 +439,7 @@ static int sdhci_sprd_remove(struct platform_device *pdev)
>       mmc_remove_host(mmc);
>       clk_disable_unprepare(sprd_host->clk_sdio);
>       clk_disable_unprepare(sprd_host->clk_enable);
> +     clk_disable_unprepare(sprd_host->clk_2x_enable);
>  
>       mmc_free_host(mmc);
>  
> @@ -449,6 +462,7 @@ static int sdhci_sprd_runtime_suspend(struct device *dev)
>  
>       clk_disable_unprepare(sprd_host->clk_sdio);
>       clk_disable_unprepare(sprd_host->clk_enable);
> +     clk_disable_unprepare(sprd_host->clk_2x_enable);
>  
>       return 0;
>  }
> @@ -459,19 +473,28 @@ static int sdhci_sprd_runtime_resume(struct device *dev)
>       struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
>       int ret;
>  
> -     ret = clk_prepare_enable(sprd_host->clk_enable);
> +     ret = clk_prepare_enable(sprd_host->clk_2x_enable);
>       if (ret)
>               return ret;
>  
> +     ret = clk_prepare_enable(sprd_host->clk_enable);
> +     if (ret)
> +             goto clk_2x_disable;
> +
>       ret = clk_prepare_enable(sprd_host->clk_sdio);
> -     if (ret) {
> -             clk_disable_unprepare(sprd_host->clk_enable);
> -             return ret;
> -     }
> +     if (ret)
> +             goto clk_disable;
>  
>       sdhci_runtime_resume_host(host);
> -
>       return 0;
> +
> +clk_disable:
> +     clk_disable_unprepare(sprd_host->clk_enable);
> +
> +clk_2x_disable:
> +     clk_disable_unprepare(sprd_host->clk_2x_enable);
> +
> +     return ret;
>  }
>  #endif
>  
> 

Reply via email to