On Mon, 2019-06-03 at 11:22 -0300, Helen Koike wrote:
> isp iommu requires wrapper variants of the clocks.
> noc variants are always on and using the wrapper variants will activate
> {A,H}CLK_ISP{0,1} due to the hierarchy.
> 
> Also add the respective power domain.
> 
> Refer:
>  RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram
>  RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition
> 
> Signed-off-by: Helen Koike <[email protected]>
> 
> ---
> Hello,
> 
> I tested this using the isp patch set (which is not upstream
> yet). Without this patch, streaming from the isp stalls.
> 
> I'm also enabling the power domain and removing the disable status,
> please let me know if this should be done in a separated patch.
> 

I think you might want to put the comments about enabling power domain
and removing disable status on the commit log. It's useful information :-)

Thanks,
Eze

> Thanks
> Helen
> 
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi 
> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 196ac9b78076..89594a7276f4 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -1706,11 +1706,11 @@
>               reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
>               interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
>               interrupt-names = "isp0_mmu";
> -             clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>;
> +             clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
>               clock-names = "aclk", "iface";
>               #iommu-cells = <0>;
> +             power-domains = <&power RK3399_PD_ISP0>;
>               rockchip,disable-mmu-reset;
> -             status = "disabled";
>       };
>  
>       isp1_mmu: iommu@ff924000 {
> @@ -1718,11 +1718,11 @@
>               reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
>               interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
>               interrupt-names = "isp1_mmu";
> -             clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>;
> +             clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
>               clock-names = "aclk", "iface";
>               #iommu-cells = <0>;
> +             power-domains = <&power RK3399_PD_ISP1>;
>               rockchip,disable-mmu-reset;
> -             status = "disabled";
>       };
>  
>       hdmi_sound: hdmi-sound {


Reply via email to