Hi! Dne torek, 04. junij 2019 ob 17:31:20 CEST je 'Ondřej Jirman' via linux-sunxi napisal(a): > Hi Jernej, > > On Tue, Jun 04, 2019 at 05:03:55PM +0200, Jernej Škrabec wrote: > > Dne torek, 04. junij 2019 ob 17:00:54 CEST je megous via linux-sunxi > > > > napisal(a): > > > From: Ondrej Jirman <[email protected]> > > > > > > The current code defines W1 clock gate to be at 0x1cc, overlaying it > > > with the IR gate. > > > > > > Clock gate for r-apb1-w1 is at 0x1ec. This fixes issues with IR receiver > > > causing interrupt floods on H6 (because interrupt flags can't be > > > cleared, > > > due to IR module's bus being disabled). > > > > > > Signed-off-by: Ondrej Jirman <[email protected]> > > > > You should add Fixes tag and CC stable with this. > > Not necessary, since H6 IR is not yet supported on mainline.
Well, CCing stable is probably really not necessary, but you are fixing bug in existing driver (clk), fixes tag still apply. Best regards, Jernej > > regards, > o. > > > Best regards, > > Jernej > > > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > [email protected] > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
