Add DT nodes for new cpsw switch dev driver.

Signed-off-by: Grygorii Strashko <[email protected]>
---
 arch/arm/boot/dts/am571x-idk.dts         | 28 +++++++++++++
 arch/arm/boot/dts/am572x-idk.dts         |  5 +++
 arch/arm/boot/dts/am574x-idk.dts         |  5 +++
 arch/arm/boot/dts/am57xx-idk-common.dtsi |  2 +-
 arch/arm/boot/dts/dra7-l4.dtsi           | 53 ++++++++++++++++++++++++
 5 files changed, 92 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 66116ad3f9f4..9262e008c968 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -194,3 +194,31 @@
        pinctrl-1 = <&mmc2_pins_hs>;
        pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
+
+&mac_sw {
+       pinctrl-names = "default", "sleep";
+       status = "okay";
+};
+
+&cpsw_port1 {
+       phy-handle = <&ethphy0_sw>;
+       phy-mode = "rgmii";
+       ti,dual_emac_pvid = <1>;
+};
+
+&cpsw_port2 {
+       phy-handle = <&ethphy1_sw>;
+       phy-mode = "rgmii";
+       ti,dual_emac_pvid = <2>;
+};
+
+&davinci_mdio_sw {
+       ethphy0_sw: ethernet-phy@0 {
+               reg = <0>;
+       };
+
+       ethphy1_sw: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 4f835222c266..1664866c46d5 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -35,3 +35,8 @@
        pinctrl-1 = <&mmc2_pins_hs>;
        pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
+
+&mac {
+       status = "okay";
+       dual_emac;
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index dc5141c35610..f4834296bd54 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -40,3 +40,8 @@
        pinctrl-1 = <&mmc2_pins_default>;
        pinctrl-2 = <&mmc2_pins_default>;
 };
+
+&mac {
+       status = "okay";
+       dual_emac;
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi 
b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index f7bd26458915..5c7663699efa 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -367,7 +367,7 @@
 };
 
 &mac {
-       status = "okay";
+//     status = "okay";
        dual_emac;
 };
 
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index fe9f0bc29fec..2bd750c95328 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3122,6 +3122,59 @@
                                        phys = <&phy_gmii_sel 2>;
                                };
                        };
+
+                       mac_sw: ethernet_switch@0 {
+                               compatible = 
"ti,dra7-cpsw-switch","ti,cpsw-switch";
+                               reg = <0x0 0x4000>;
+                               ranges = <0 0 0x4000>;
+                               clocks = <&gmac_main_clk>;
+                               clock-names = "fck";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               syscon = <&scm_conf>;
+                               status = "disabled";
+
+                               interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "rx_thresh", "rx", "tx", 
"misc";
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       cpsw_port1: port@1 {
+                                               reg = <1>;
+                                               ti,label = "port1";
+                                               /* Filled in by U-Boot */
+                                               mac-address = [ 00 00 00 00 00 
00 ];
+                                               phys = <&phy_gmii_sel 1>;
+                                       };
+
+                                       cpsw_port2: port@2 {
+                                               reg = <2>;
+                                               ti,label = "port2";
+                                               /* Filled in by U-Boot */
+                                               mac-address = [ 00 00 00 00 00 
00 ];
+                                               phys = <&phy_gmii_sel 2>;
+                                       };
+                               };
+
+                               davinci_mdio_sw: mdio@1000 {
+                                       compatible = 
"ti,cpsw-mdio","ti,davinci_mdio";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       ti,hwmods = "davinci_mdio";
+                                       bus_freq = <1000000>;
+                                       reg = <0x1000 0x100>;
+                               };
+
+                               cpts {
+                                       clocks = <&gmac_clkctrl 
DRA7_GMAC_GMAC_CLKCTRL 25>;
+                                       clock-names = "cpts";
+                               };
+                       };
                };
        };
 };
-- 
2.17.1

Reply via email to