On Wed, 2019-06-26 at 18:23 +0200, Boris Brezillon wrote:
> On Wed, 26 Jun 2019 13:36:27 +0800
> Qii Wang <qii.w...@mediatek.com> wrote:
>
> > Document MediaTek I3C master DT bindings.
> >
> > Signed-off-by: Qii Wang <qii.w...@mediatek.com>
> > ---
> > .../devicetree/bindings/i3c/mtk,i3c-master.txt | 47
> > ++++++++++++++++++++
> > 1 file changed, 47 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > new file mode 100644
> > index 0000000..3fd4f17
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > @@ -0,0 +1,47 @@
> > +Bindings for MediaTek I3C master block
> > +=====================================
> > +
> > +Required properties:
> > +--------------------
> > +- compatible: shall be "mediatek,i3c-master"
> > +- reg: physical base address of the controller and apdma base, length of
> > + memory mapped region.
> > +- reg-names: should be "main" for controller and "dma" for apdma.
> > +- interrupts: interrupt number to the cpu.
>
> Depending on the interrupt controller, each interrupt cell might
> contain more than just the interrupt number.
>
ok, I will modify it as "the interrupt line connected to this I3C
master"
> > +- clocks: clock name from clock manager.
>
> This property does not contain clock names but clk references.
>
ok, I will modify it as "shall reference the i3c and apdma clocks"
> > +- clock-names: must include "main" and "dma".
> > +
> > +Mandatory properties defined by the generic binding (see
> > +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> > +
> > +- #address-cells: shall be set to 3
> > +- #size-cells: shall be set to 0
> > +
> > +Optional properties defined by the generic binding (see
> > +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> > +
> > +- i2c-scl-hz
> > +- i3c-scl-hz
> > +
> > +I3C device connected on the bus follow the generic description (see
> > +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
> > +
> > +Example:
> > +
> > + i3c0: i3c@1100d000 {
> > + compatible = "mediatek,i3c-master";
> > + reg = <0x1100d000 0x100>,
> > + <0x11000300 0x80>;
> > + reg-names = "main", "dma";
> > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&i3c0_ck>, <&ap_dma_ck>;
> > + clock-names = "main", "dma";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + i2c-scl-hz = <100000>;
> > +
> > + nunchuk: nunchuk@52 {
> > + compatible = "nintendo,nunchuk";
> > + reg = <0x52 0x80000010 0>;
>
> reg is wrong here, should be
>
> reg = <0x52 0x0 0x10>;
>
> While at it, can you send a patch to fix the example in the cadence
> binding doc?
>
ok, I will do it. Thanks for your review.
> > + };
> > + };
>
