On Mon, Jul 1, 2019 at 7:54 PM Martin Blumenstingl <[email protected]> wrote: > > On Mon, Jun 24, 2019 at 7:41 AM Minas Harutyunyan > <[email protected]> wrote: > > > > On 6/20/2019 9:51 PM, Martin Blumenstingl wrote: > > > Use a 10000us AHB idle timeout in dwc2_core_reset() and make it > > > consistent with the other "wait for AHB master IDLE state" ocurrences. > > > > > > This fixes a problem for me where dwc2 would not want to initialize when > > > updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with > > > 4.14. > > > Testing on my board shows that it takes 180us until AHB master IDLE > > > state is signalled. The very old vendor driver for this SoC (ifxhcd) > > > used a 1 second timeout. > > > Use the same timeout that is used everywhere when polling for > > > GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" > > > (180us in my case) to have consistent behavior across the dwc2 driver. > > > > > > Cc: linux-stable <[email protected]> # 4.19+ > > > Signed-off-by: Martin Blumenstingl <[email protected]> > > > --- > > > > Acked-by: Minas Harutyunyan <[email protected]> > thank you for reviewing this! > > is there any chance we can get this fix into Linux 5.3? I know that > it's too late for 5.2 so I'm fine with skipping that. thank you Felipe for queuing this for v5.3! for reference, this patch is now in the usb-for-v5.3-part2 tag: [0]
[0] https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git/commit/?h=usb-for-v5.3-part2&id=dfc4fdebc5d62ac4e2fe5428e59b273675515fb2
