On 05-07-19, 11:57, Niklas Cassel wrote:
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> cpu_opp_table: cpu-opp-table {
> - compatible = "operating-points-v2";
> + compatible = "operating-points-v2-kryo-cpu";
> opp-shared;
>
> opp-1094400000 {
> opp-hz = /bits/ 64 <1094400000>;
> - opp-microvolt = <1224000 1224000 1224000>;
> + required-opps = <&cpr_opp1>;
> };
> opp-1248000000 {
> opp-hz = /bits/ 64 <1248000000>;
> - opp-microvolt = <1288000 1288000 1288000>;
> + required-opps = <&cpr_opp2>;
> };
> opp-1401600000 {
> opp-hz = /bits/ 64 <1401600000>;
> - opp-microvolt = <1384000 1384000 1384000>;
> + required-opps = <&cpr_opp3>;
> + };
> + };
> +
> + cpr_opp_table: cpr-opp-table {
> + compatible = "operating-points-v2-qcom-level";
> +
> + cpr_opp1: opp1 {
> + opp-level = <1>;
> + qcom,opp-fuse-level = <1>;
> + opp-hz = /bits/ 64 <1094400000>;
> + };
> + cpr_opp2: opp2 {
> + opp-level = <2>;
> + qcom,opp-fuse-level = <2>;
> + opp-hz = /bits/ 64 <1248000000>;
> + };
> + cpr_opp3: opp3 {
> + opp-level = <3>;
> + qcom,opp-fuse-level = <3>;
> + opp-hz = /bits/ 64 <1401600000>;
> };
> };
- Do we ever have cases more complex than this for this version of CPR ?
- What about multiple devices with same CPR table, not big LITTLE
CPUs, but other devices like two different type of IO devices ? What
will we do with opp-hz in those cases ?
- If there are no such cases, can we live without opp-hz being used
here and reverse-engineer the highest frequency by looking directly
at CPUs OPP table ? i.e. by looking at required-opps field.
--
viresh
