Hello!
When working in cpu autoconfiguration I found some problems:
I have to identify this processor:
Vendor: Intel
Family: 6
Model: 8
Is it a "Pentium III (Coppermine)" (setup.c:1709)
or a "Celeron (Coppermine)" (setup.c:1650) ?
What is the difference between MWINCHIP2 and MWINCHIP3D?
I don't find differences in the sources
giacomo
Version 3 of my cpu detection and configuration:
diff -uNr old.linux/CREDITS linux/CREDITS
--- old.linux/CREDITS Fri Dec 29 13:32:46 2000
+++ linux/CREDITS Fri Dec 29 13:43:02 2000
@@ -458,6 +458,12 @@
S: Fremont, California 94539
S: USA
+N: Giacomo Catenazzi
+E: [EMAIL PROTECTED]
+D: Random kernel hack and fixes
+D: Author of scripts/cpu_detect.sh
+S: Switzerland
+
N: Gordon Chaffee
E: [EMAIL PROTECTED]
W: http://bmrc.berkeley.edu/people/chaffee/
diff -uNr old.linux/Makefile linux/Makefile
--- old.linux/Makefile Fri Dec 29 11:26:55 2000
+++ linux/Makefile Fri Dec 29 13:32:10 2000
@@ -65,6 +65,16 @@
do-it-all: config
endif
+# Second stage configuration
+# Note that GNU make will read again this Makefile, so the CONFIG are
+# updated
+ifeq ($(CONFIG_CPU_CURRENT), y)
+CONFIGURATION = config2
+do-it-all: config2
+.config: config2
+ @echo "Rescanning the main Makefile"
+endif
+
#
# INSTALL_PATH specifies where to place the updated kernel and system
map
# images. Uncomment if you want to place them anywhere other than
root.
@@ -273,6 +283,14 @@
config: symlinks
$(CONFIG_SHELL) scripts/Configure arch/$(ARCH)/config.in
+
+config2:
+ echo "CONFIG_CPU_CURRENT=n" >> .config
+ echo `$(CONFIG_SHELL) $(TOPDIR)/scripts/cpu_detect.sh`=y >> .config
+ $(MAKE) oldconfig
+
+config2.test:
+ echo "CONFIG_CPU_CURRENT=$(CONFIG_CPU_CURRENT)"
include/config/MARKER: scripts/split-include include/linux/autoconf.h
scripts/split-include include/linux/autoconf.h include/config
diff -uNr old.linux/arch/i386/config.in linux/arch/i386/config.in
--- old.linux/arch/i386/config.in Fri Dec 29 11:26:55 2000
+++ linux/arch/i386/config.in Fri Dec 29 13:14:58 2000
@@ -26,7 +26,9 @@
mainmenu_option next_comment
comment 'Processor type and features'
-choice 'Processor family' \
+bool "Optimize for current CPU" CONFIG_CPU_CURRENT
+if [ "$CONFIG_CPU_CURRENT" != "y" ]; then
+ choice 'Processor family' \
"386 CONFIG_M386 \
486 CONFIG_M486 \
586/K5/5x86/6x86/6x86MX CONFIG_M586 \
@@ -41,6 +43,10 @@
Winchip-C6 CONFIG_MWINCHIPC6 \
Winchip-2 CONFIG_MWINCHIP2 \
Winchip-2A/Winchip-3 CONFIG_MWINCHIP3D" Pentium-Pro
+else
+ # First configuration stage: Allow all possible processors deps
+ define_bool CONFIG_M386 y
+fi
#
# Define implied options from the CPU selection here
#
diff -uNr old.linux/scripts/cpu_detect.sh linux/scripts/cpu_detect.sh
--- old.linux/scripts/cpu_detect.sh Thu Jan 1 01:00:00 1970
+++ linux/scripts/cpu_detect.sh Tue Jan 2 10:29:31 2001
@@ -0,0 +1,81 @@
+#! /bin/bash
+
+# Copyright (C) 2000-2001 Giacomo Catenazzi <[EMAIL PROTECTED]>
+# This is free software, see GNU General Public License 2 for details.
+
+# This script try to autodetect the CPU.
+# On SMP I assume that all processors are of the same type as the first
+
+# Version 3
+
+
+function check_cpu () {
+ if echo "$cpu_id" | egrep -e "$1" ; then
+ # CPU detected
+ echo $2
+ exit 0
+ fi
+}
+
+
+### i386 ###
+
+if [ "$ARCH" = "i386" ] ; then
+
+ if [ ! -r /proc/cpuinfo ] ; then
+ echo "cpu_detect: Could not read /proc/cpuinfo" 1>&2
+ echo CONFIG_M386
+ exit 2
+ fi
+
+ vendor=$(sed -n 's/^vendor_id.*: *\([-A-Za-z0-9_]*\).*$/\1/pg'
/proc/cpuinfo)
+ cpu_fam=$(sed -n 's/^cpu family.*: *\([0-9A-Za-z]*\).*$/\1/pg'
/proc/cpuinfo)
+ cpu_mod=$(sed -n 's/^model[^a-z]*: *\([0-9A-Za-z]*\).*$/\1/pg'
/proc/cpuinfo)
+ cpu_name=$(sed -n 's/^model name.*: *\(.*\)$/\1/pg' /proc/cpuinfo)
+ cpu_id="$vendor:$cpu_fam:$cpu_mod:$cpu_name"
+
+ #echo $cpu_id # for debug
+
+ check_cpu '^GenuineIntel:.*:.*:Pentium [67]' CONFIG_M586TSC
+ check_cpu '^GenuineIntel:.*:.*:Pentium MMX' CONFIG_M586MMX
+ check_cpu '^GenuineIntel:.*:.*:Pentium Pro' CONFIG_M686
+ check_cpu '^GenuineIntel:.*:.*:Pentium II\>' CONFIG_M686
+ check_cpu '^GenuineIntel:.*:.*:Celeron' CONFIG_M686
+ check_cpu '^GenuineIntel:.*:.*:Pentium III' CONFIG_M686FXSR
+ check_cpu '^GenuineIntel:.*:.*:Pentium IV' CONFIG_MPENTIUM4 #
???
+ check_cpu '^GenuineIntel:4:.*:' CONFIG_M486
+ check_cpu '^GenuineIntel:5:[01237]:' CONFIG_M586TSC
+ check_cpu '^GenuineIntel:5:[48]:' CONFIG_M586MMX
+ check_cpu '^GenuineIntel:6:[01356]:' CONFIG_M686
+ check_cpu '^GenuineIntel:6:[789]:' CONFIG_M686FXSR
+ check_cpu '^GenuineIntel:6:1[1]:' CONFIG_M686FXSR
+
+ check_cpu '^AuthenticAMD:.*:.*:K5' CONFIG_M586
+ check_cpu '^AuthenticAMD:.*:.*:K6' CONFIG_MK6
+ check_cpu '^AuthenticAMD:.*:.*:Athlon' CONFIG_MK7
+ check_cpu '^AuthenticAMD:4:.*:' CONFIG_M486
+ check_cpu '^AuthenticAMD:5:[0123]:' CONFIG_M586
+ check_cpu '^AuthenticAMD:5:[89]:' CONFIG_MK6
+ check_cpu '^AuthenticAMD:5:1[01]:' CONFIG_MK6
+ check_cpu '^AuthenticAMD:6:[0124]:' CONFIG_MK7
+
+ check_cpu '^UMC:4:[12]:' CONFIG_M486
+ check_cpu '^NexGenDriven:.*:.*:Nx586' CONFIG_M386
+ check_cpu '^NexGenDriven:5:0:' CONFIG_M386
+ check_cpu '^TransmetaCPU:.*:.*:' CONFIG_MCRUSOE
+ check_cpu '^GenuineTMx86:.*:.*:' CONFIG_MCRUSOE
+
+ check_cpu '^CentaurHauls:.*:.*:WinChip C6' CONFIG_MWINCHIPC6
+ check_cpu '^CentaurHauls:.*:.*:WinChip 2\>' CONFIG_MWINCHIP2
+ check_cpu '^CentaurHauls:.*:.*:WinChip 2[AB]' CONFIG_MWINCHIP2A
+ check_cpu '^CentaurHauls:.*:.*:WinChip [34]' CONFIG_MWINCHIP2A
+ check_cpu '^CentaurHauls:5:4:' CONFIG_MWINCHIPC6
+
+ # default value
+ check_cpu '^.*:.*:.*:' CONFIG_M386
+ echo "cpu_detect: CPU not detected. Using default" 2>&1
+ exit 1
+fi
+
+echo "cpu_detect: ARCH '$ARCH' not implemented" 2>&1
+exit 3
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
