Hi Kamil,
On 19. 7. 15. 오후 9:04, Kamil Konieczny wrote:
> Add enable regulators to dev_pm_opp_set_regulators() and disable
> regulators to dev_pm_opp_put_regulators(). This prepares for
> converting exynos-bus devfreq driver to use dev_pm_opp_set_rate().
IMHO, it is not proper to mention the specific driver name.
If you explain the reason why enable the regulator before using it,
it is enough description.
>
> Signed-off-by: Kamil Konieczny <k.koniec...@partner.samsung.com>
> --
> Changes in v2:
>
> - move regulator enable and disable into loop
>
> ---
> drivers/opp/core.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/opp/core.c b/drivers/opp/core.c
> index 0e7703fe733f..069c5cf8827e 100644
> --- a/drivers/opp/core.c
> +++ b/drivers/opp/core.c
> @@ -1570,6 +1570,10 @@ struct opp_table *dev_pm_opp_set_regulators(struct
> device *dev,
> goto free_regulators;
> }
>
> + ret = regulator_enable(reg);
> + if (ret < 0)
> + goto disable;
> +
> opp_table->regulators[i] = reg;
> }
>
> @@ -1582,9 +1586,15 @@ struct opp_table *dev_pm_opp_set_regulators(struct
> device *dev,
>
> return opp_table;
>
> +disable:
> + regulator_put(reg);
> + --i;
> +
> free_regulators:
> - while (i != 0)
> - regulator_put(opp_table->regulators[--i]);
> + for (; i >= 0; --i) {
> + regulator_disable(opp_table->regulators[i]);
> + regulator_put(opp_table->regulators[i]);
> + }
>
> kfree(opp_table->regulators);
> opp_table->regulators = NULL;
> @@ -1610,8 +1620,10 @@ void dev_pm_opp_put_regulators(struct opp_table
> *opp_table)
> /* Make sure there are no concurrent readers while updating opp_table */
> WARN_ON(!list_empty(&opp_table->opp_list));
>
> - for (i = opp_table->regulator_count - 1; i >= 0; i--)
> + for (i = opp_table->regulator_count - 1; i >= 0; i--) {
> + regulator_disable(opp_table->regulators[i]);
> regulator_put(opp_table->regulators[i]);
> + }
>
> _free_set_opp_data(opp_table);
>
>
I agree to enable the regulator before using it.
The bootloader might not enable the regulators
and the kernel need to enable regulator in order to increase
the reference count explicitly event if bootloader enables it.
Reviewed-by: Chanwoo Choi <cw00.c...@samsung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
