From: Alexandre Torgue <[email protected]> Pins used for joystick are all configured as input. "Push-pull" is not a valid setting for an input.
Signed-off-by: Alexandre Torgue <[email protected]> Signed-off-by: Amelie Delaunay <[email protected]> --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index e4b04dd..7d15f05 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -220,7 +220,6 @@ joystick_pins: joystick { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; bias-pull-down; }; }; -- 2.7.4
