On 7/2/19 5:52 PM, Hugues Fruchet wrote:
> Add support of several sub-devices within pipeline instead
> of a single one.
> This allows to support a CSI-2 camera sensor connected
> through a CSI-2 to parallel bridge.
>
> Signed-off-by: Hugues Fruchet <[email protected]>
> ---
> drivers/media/platform/stm32/stm32-dcmi.c | 204
> +++++++++++++++++++++++++++---
> 1 file changed, 186 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c
> b/drivers/media/platform/stm32/stm32-dcmi.c
> index 6f37617..6921e6b 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -172,6 +172,7 @@ struct stm32_dcmi {
>
> struct media_device mdev;
> struct media_pad vid_cap_pad;
> + struct media_pipeline pipeline;
> };
>
> static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier
> *n)
> @@ -583,6 +584,131 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
> spin_unlock_irq(&dcmi->irqlock);
> }
>
> +static struct media_entity *dcmi_find_source(struct stm32_dcmi *dcmi)
> +{
> + struct media_entity *entity = &dcmi->vdev->entity;
> + struct media_pad *pad;
> +
> + /* Walk searching for entity having no sink */
> + while (1) {
> + pad = &entity->pads[0];
> + if (!(pad->flags & MEDIA_PAD_FL_SINK))
> + break;
> +
> + pad = media_entity_remote_pad(pad);
> + if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> + break;
> +
> + entity = pad->entity;
> + }
> +
> + return entity;
> +}
> +
> +static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi,
> + struct v4l2_subdev_pad_config *pad_cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct media_entity *entity = &dcmi->entity.source->entity;
> + struct v4l2_subdev *subdev;
> + struct media_pad *sink_pad = NULL;
> + struct media_pad *src_pad = NULL;
> + struct media_pad *pad = NULL;
> + struct v4l2_subdev_format fmt = *format;
> + bool found = false;
> + int ret;
> +
> + /*
> + * Starting from sensor subdevice, walk within
> + * pipeline and set format on each subdevice
> + */
> + while (1) {
> + unsigned int i;
> +
> + /* Search if current entity has a source pad */
> + for (i = 0; i < entity->num_pads; i++) {
> + pad = &entity->pads[i];
> + if (pad->flags & MEDIA_PAD_FL_SOURCE) {
> + src_pad = pad;
> + found = true;
> + break;
> + }
> + }
> + if (!found)
> + break;
> +
> + subdev = media_entity_to_v4l2_subdev(entity);
> +
> + /* Propagate format on sink pad if any, otherwise source pad */
> + if (sink_pad)
> + pad = sink_pad;
> +
> + dev_dbg(dcmi->dev, "%s[%d] pad format set to 0x%x %ux%u\n",
> + subdev->name, pad->index, format->format.code,
> + format->format.width, format->format.height);
> +
> + fmt.pad = pad->index;
> + ret = v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
> + if (ret < 0)
> + return ret;
> +
> + /* Walk to next entity */
> + sink_pad = media_entity_remote_pad(src_pad);
> + if (!sink_pad || !is_media_entity_v4l2_subdev(sink_pad->entity))
> + break;
> +
> + entity = sink_pad->entity;
> + }
> + *format = fmt;
> +
> + return 0;
> +}
> +
> +static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state)
> +{
> + struct media_entity *entity = &dcmi->vdev->entity;
> + struct v4l2_subdev *subdev;
> + struct media_pad *pad;
> + int ret;
> +
> + /* Start/stop all entities within pipeline */
> + while (1) {
> + pad = &entity->pads[0];
> + if (!(pad->flags & MEDIA_PAD_FL_SINK))
> + break;
> +
> + pad = media_entity_remote_pad(pad);
> + if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> + break;
> +
> + entity = pad->entity;
> + subdev = media_entity_to_v4l2_subdev(entity);
> +
> + ret = v4l2_subdev_call(subdev, video, s_stream, state);
> + if (ret < 0 && ret != -ENOIOCTLCMD) {
> + dev_err(dcmi->dev, "%s: %s failed to %s streaming
> (%d)\n",
> + __func__, subdev->name,
> + state ? "start" : "stop", ret);
> + return ret;
> + }
> +
> + dev_dbg(dcmi->dev, "%s is %s\n",
> + subdev->name, state ? "started" : "stopped");
> + }
> +
> + return 0;
> +}
> +
> +static int dcmi_pipeline_start(struct stm32_dcmi *dcmi)
> +{
> + return dcmi_pipeline_s_stream(dcmi, 1);
> +}
> +
> +static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi)
> +{
> + dcmi_pipeline_s_stream(dcmi, 0);
> +}
> +
> static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
> {
> struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
> @@ -597,14 +723,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq,
> unsigned int count)
> goto err_release_buffers;
> }
>
> - /* Enable stream on the sub device */
> - ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 1);
> - if (ret && ret != -ENOIOCTLCMD) {
> - dev_err(dcmi->dev, "%s: Failed to start streaming, subdev
> streamon error",
> - __func__);
> + ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
> + if (ret < 0) {
> + dev_err(dcmi->dev, "%s: Failed to start streaming, media
> pipeline start error (%d)\n",
> + __func__, ret);
> goto err_pm_put;
> }
>
> + ret = dcmi_pipeline_start(dcmi);
> + if (ret)
> + goto err_media_pipeline_stop;
> +
> spin_lock_irq(&dcmi->irqlock);
>
> /* Set bus width */
> @@ -676,7 +805,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq,
> unsigned int count)
> if (ret) {
> dev_err(dcmi->dev, "%s: Start streaming failed, cannot start
> capture\n",
> __func__);
> - goto err_subdev_streamoff;
> + goto err_pipeline_stop;
> }
>
> /* Enable interruptions */
> @@ -687,8 +816,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq,
> unsigned int count)
>
> return 0;
>
> -err_subdev_streamoff:
> - v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
> +err_pipeline_stop:
> + dcmi_pipeline_stop(dcmi);
> +
> +err_media_pipeline_stop:
> + media_pipeline_stop(&dcmi->vdev->entity);
>
> err_pm_put:
> pm_runtime_put(dcmi->dev);
> @@ -713,13 +845,10 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
> {
> struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
> struct dcmi_buf *buf, *node;
> - int ret;
>
> - /* Disable stream on the sub device */
> - ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
> - if (ret && ret != -ENOIOCTLCMD)
> - dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev
> streamoff error (%d)\n",
> - __func__, ret);
> + dcmi_pipeline_stop(dcmi);
> +
> + media_pipeline_stop(&dcmi->vdev->entity);
>
> spin_lock_irq(&dcmi->irqlock);
>
> @@ -937,8 +1066,7 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct
> v4l2_format *f)
> mf->width = sd_framesize.width;
> mf->height = sd_framesize.height;
>
> - ret = v4l2_subdev_call(dcmi->entity.source, pad,
> - set_fmt, NULL, &format);
> + ret = dcmi_pipeline_s_fmt(dcmi, NULL, &format);
> if (ret < 0)
> return ret;
>
> @@ -1529,7 +1657,20 @@ static int dcmi_graph_notify_complete(struct
> v4l2_async_notifier *notifier)
> struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
> int ret;
>
> + /*
> + * Now that the graph is complete,
> + * we search for the source subdevice
> + * in order to expose it through V4L2 interface
> + */
> + dcmi->entity.source =
> + media_entity_to_v4l2_subdev(dcmi_find_source(dcmi));
> + if (!dcmi->entity.source) {
> + dev_err(dcmi->dev, "Source subdevice not found\n");
> + return -ENODEV;
> + }
> +
> dcmi->vdev->ctrl_handler = dcmi->entity.source->ctrl_handler;
> +
> ret = dcmi_formats_init(dcmi);
> if (ret) {
> dev_err(dcmi->dev, "No supported mediabus format found\n");
> @@ -1574,12 +1715,30 @@ static int dcmi_graph_notify_bound(struct
> v4l2_async_notifier *notifier,
> struct v4l2_async_subdev *asd)
> {
> struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
> + unsigned int ret;
> + int src_pad;
>
> dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name);
>
> - dcmi->entity.source = subdev;
> + /*
> + * Link this sub-device to DCMI, it could be
> + * a parallel camera sensor or a bridge
> + */
> + src_pad = media_entity_get_fwnode_pad(&subdev->entity,
> + subdev->fwnode,
> + MEDIA_PAD_FL_SOURCE);
> +
> + ret = media_create_pad_link(&subdev->entity, src_pad,
> + &dcmi->vdev->entity, 0,
> + MEDIA_LNK_FL_IMMUTABLE |
> + MEDIA_LNK_FL_ENABLED);
> + if (ret)
> + dev_err(dcmi->dev, "Failed to create media pad link with subdev
> %s\n",
> + subdev->name);
> + else
> + dev_dbg(dcmi->dev, "DCMI is now linked to %s\n", subdev->name);
>
> - return 0;
> + return ret;
> }
>
> static const struct v4l2_async_notifier_operations dcmi_graph_notify_ops = {
> @@ -1639,6 +1798,15 @@ static int dcmi_graph_init(struct stm32_dcmi *dcmi)
> return ret;
> }
>
> + /* Register all the subdev nodes */
> + ret = v4l2_device_register_subdev_nodes(&dcmi->v4l2_dev);
This shouldn't be needed. Only MC-centric drivers (i.e. where the pipeline
has to be configured by userspace) need to do this.
Otherwise this patch looks good.
Regards,
Hans
> + if (ret) {
> + dev_err(dcmi->dev, "Failed to register subdev nodes\n");
> + v4l2_async_notifier_unregister(&dcmi->notifier);
> + of_node_put(dcmi->entity.remote_node);
> + return ret;
> + }
> +
> return 0;
> }
>
>
