Hello Linus, Thanks for your detailed comments.
We just submitted a v6 of sgpio-aspeed.c, it includes the updates based on your initial feedback: 1. fix a bug in aspeed_sgpio_dir_out() 2. some comments clean up. Regards, --Hongwei > From: Linus Walleij <[email protected]> > Sent: Sunday, July 28, 2019 7:38 PM > To: Hongwei Zhang > Cc: Andrew Jeffery; linux-gpio; Joel Stanley; linux-aspeed; Bartosz > Golaszewski; linux-kernel; linux- > arm-kernel > Subject: Re: [v5 2/2] gpio: aspeed: Add SGPIO driver > > On Mon, Jul 22, 2019 at 10:37 PM Hongwei Zhang <[email protected]> wrote: > > > As you suspected it correctly, AST2500 utilizes all the 32 bits of the > > registers (data value, interrupt, etc...), such that using 8-bit bands > > [7:0]/[15:8]/23:16]/[31:24] of GPIO_200H for SGPIO_A/B/C/D . > > so registering 10 gpiochip drivers separately will make code more > > complicated, for example gpio_200 register (data_value reg) has to be > > shared by 4 gpiochip instances, and the same is true for gpio204 > > (interrupt reg), and other more registers. > > So we would prefer to keeping current implementation. > > OK this is a pretty good argument. My review assumed one 32-bit register was > not shared between > banks but it is, I see. > > The above situation can be managed by regmap, but that will just a different > complexity so go with this > approach then. > > Yours, > Linus Walleij
