On 30. 07. 19 16:46, Philippe Schenker wrote:
From: Philippe Schenker <philippe.schen...@toradex.com>
This patch prepares the devicetree for the new Ixora V1.2 where we are
able to turn off the supply of the can transceiver. This implies to use
a sleep state on transmission pins in order to prevent backfeeding.
Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com>
---
What about "ARM: dts: imx6qdl-apalis: " for the subject?
To be clear that this is not related to the imx6 SoC itself.
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 7c4ad541c3f5..59ed2e4a1fd1 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -148,14 +148,16 @@
};
&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_flexcan1_default>;
+ pinctrl-1 = <&pinctrl_flexcan1_sleep>;
status = "disabled";
};
&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_flexcan2_default>;
+ pinctrl-1 = <&pinctrl_flexcan2_sleep>;
status = "disabled";
};
@@ -599,19 +601,32 @@
>;
};
- pinctrl_flexcan1: flexcan1grp {
+ pinctrl_flexcan1_default: flexcan1defgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
>;
};
- pinctrl_flexcan2: flexcan2grp {
+ pinctrl_flexcan1_sleep: flexcan1slpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
+ >;
+ };
+
+ pinctrl_flexcan2_default: flexcan2defgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
>;
};
+ pinctrl_flexcan2_sleep: flexcan2slpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
+ >;
+ };
pinctrl_gpio_bl_on: gpioblon {
fsl,pins = <
