From: Jason Gunthorpe <[email protected]>

commit 621e55ff5b8e0ab5d1063f0eae0ef3960bef8f6e upstream.

lockdep reports:

   WARNING: possible circular locking dependency detected

   modprobe/302 is trying to acquire lock:
   0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990

   but task is already holding lock:
   000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: 
remove_client_context+0x79/0xd0 [ib_core]

   which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

   -> #2 (&device->client_data_rwsem){++++}:
          down_read+0x3f/0x160
          ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
          cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
          cm_process_work+0x29/0x110 [ib_cm]
          cm_req_handler+0x10f5/0x1c00 [ib_cm]
          cm_work_handler+0x54c/0x311d [ib_cm]
          process_one_work+0x4aa/0xa30
          worker_thread+0x62/0x5b0
          kthread+0x1ca/0x1f0
          ret_from_fork+0x24/0x30

   -> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
          process_one_work+0x45f/0xa30
          worker_thread+0x62/0x5b0
          kthread+0x1ca/0x1f0
          ret_from_fork+0x24/0x30

   -> #0 ((wq_completion)ib_cm){+.+.}:
          lock_acquire+0xc8/0x1d0
          flush_workqueue+0x102/0x990
          cm_remove_one+0x30e/0x3c0 [ib_cm]
          remove_client_context+0x94/0xd0 [ib_core]
          disable_device+0x10a/0x1f0 [ib_core]
          __ib_unregister_device+0x5a/0xe0 [ib_core]
          ib_unregister_device+0x21/0x30 [ib_core]
          mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
          __mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
          mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
          mlx5_remove_device+0x144/0x150 [mlx5_core]
          mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
          mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
          __x64_sys_delete_module+0x227/0x350
          do_syscall_64+0xc3/0x6a4
          entry_SYSCALL_64_after_hwframe+0x49/0xbe

Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.

The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.

Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.

This will fence the two unregistration paths without holding any locks.

Cc: <[email protected]>
Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
 drivers/infiniband/core/device.c |   54 +++++++++++++++++++++++++++++----------
 include/rdma/ib_verbs.h          |    3 ++
 2 files changed, 44 insertions(+), 13 deletions(-)

--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -98,6 +98,12 @@ static LIST_HEAD(client_list);
 static DEFINE_XARRAY_FLAGS(clients, XA_FLAGS_ALLOC);
 static DECLARE_RWSEM(clients_rwsem);
 
+static void ib_client_put(struct ib_client *client)
+{
+       if (refcount_dec_and_test(&client->uses))
+               complete(&client->uses_zero);
+}
+
 /*
  * If client_data is registered then the corresponding client must also still
  * be registered.
@@ -651,6 +657,14 @@ static int add_client_context(struct ib_
 
        down_write(&device->client_data_rwsem);
        /*
+        * So long as the client is registered hold both the client and device
+        * unregistration locks.
+        */
+       if (!refcount_inc_not_zero(&client->uses))
+               goto out_unlock;
+       refcount_inc(&device->refcount);
+
+       /*
         * Another caller to add_client_context got here first and has already
         * completely initialized context.
         */
@@ -673,6 +687,9 @@ static int add_client_context(struct ib_
        return 0;
 
 out:
+       ib_device_put(device);
+       ib_client_put(client);
+out_unlock:
        up_write(&device->client_data_rwsem);
        return ret;
 }
@@ -692,7 +709,7 @@ static void remove_client_context(struct
        client_data = xa_load(&device->client_data, client_id);
        xa_clear_mark(&device->client_data, client_id, CLIENT_DATA_REGISTERED);
        client = xa_load(&clients, client_id);
-       downgrade_write(&device->client_data_rwsem);
+       up_write(&device->client_data_rwsem);
 
        /*
         * Notice we cannot be holding any exclusive locks when calling the
@@ -702,17 +719,13 @@ static void remove_client_context(struct
         *
         * For this reason clients and drivers should not call the
         * unregistration functions will holdling any locks.
-        *
-        * It tempting to drop the client_data_rwsem too, but this is required
-        * to ensure that unregister_client does not return until all clients
-        * are completely unregistered, which is required to avoid module
-        * unloading races.
         */
        if (client->remove)
                client->remove(device, client_data);
 
        xa_erase(&device->client_data, client_id);
-       up_read(&device->client_data_rwsem);
+       ib_device_put(device);
+       ib_client_put(client);
 }
 
 static int alloc_port_data(struct ib_device *device)
@@ -1696,6 +1709,8 @@ int ib_register_client(struct ib_client
        unsigned long index;
        int ret;
 
+       refcount_set(&client->uses, 1);
+       init_completion(&client->uses_zero);
        ret = assign_client_id(client);
        if (ret)
                return ret;
@@ -1731,16 +1746,29 @@ void ib_unregister_client(struct ib_clie
        unsigned long index;
 
        down_write(&clients_rwsem);
+       ib_client_put(client);
        xa_clear_mark(&clients, client->client_id, CLIENT_REGISTERED);
        up_write(&clients_rwsem);
+
+       /* We do not want to have locks while calling client->remove() */
+       rcu_read_lock();
+       xa_for_each (&devices, index, device) {
+               if (!ib_device_try_get(device))
+                       continue;
+               rcu_read_unlock();
+
+               remove_client_context(device, client->client_id);
+
+               ib_device_put(device);
+               rcu_read_lock();
+       }
+       rcu_read_unlock();
+
        /*
-        * Every device still known must be serialized to make sure we are
-        * done with the client callbacks before we return.
+        * remove_client_context() is not a fence, it can return even though a
+        * removal is ongoing. Wait until all removals are completed.
         */
-       down_read(&devices_rwsem);
-       xa_for_each (&devices, index, device)
-               remove_client_context(device, client->client_id);
-       up_read(&devices_rwsem);
+       wait_for_completion(&client->uses_zero);
 
        down_write(&clients_rwsem);
        list_del(&client->list);
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -2722,6 +2722,9 @@ struct ib_client {
                        const union ib_gid *gid,
                        const struct sockaddr *addr,
                        void *client_data);
+
+       refcount_t uses;
+       struct completion uses_zero;
        struct list_head list;
        u32 client_id;
 


Reply via email to