Let's cc the USB mailing list. On Fri, 14 Sep 2007 23:28:23 +0200 Christian Volkmann <[EMAIL PROTECTED]> wrote:
> Hi everybody, > > I have an error message with 2.6.23-rc6. > This did not happen with 2.6.22. Another one for Michal's dirt file. > The kernel reports message like this: > <3>usb 1-1: device not accepting address 2, error -62 > <3>hub 2-2.1:1.0: hub_port_status failed (err = -71) > > Does this message harm or is something broken in 2.6.23-rc6 ? > I get this kind of messages also with 2.6.23-rc3 Does the machine otherwise work OK? Even if it does, I don't think we should be (newly) spraying scary messages like that at people. > Best regards, > > Christian > > > Please see below for: > > grep -e hub -e usb boot.msg for a 2.6.23-rc6 boot. (that boot was without > (err = -71) > grep -e hub -e usb boot.msg for a 2.6.22 boot. > lspci -vnn (2.6.22) > lsusb -v (2.6.22) > > > 2.6.23-rc6 boot.msg extract ( hub/usb ) > > <6>usbcore: registered new interface driver usbfs > <6>usbcore: registered new interface driver hub > <6>usbcore: registered new device driver usb > <6>usb usb1: configuration #1 chosen from 1 choice > <6>hub 1-0:1.0: USB hub found > <6>hub 1-0:1.0: 2 ports detected > <6>usb usb2: configuration #1 chosen from 1 choice > <6>hub 2-0:1.0: USB hub found > <6>hub 2-0:1.0: 2 ports detected > <6>usb 1-1: new low speed USB device using ohci_hcd and address 2 > <6>usb usb3: configuration #1 chosen from 1 choice > <6>hub 3-0:1.0: USB hub found > <6>hub 3-0:1.0: 2 ports detected > <6>usb usb4: configuration #1 chosen from 1 choice > <6>hub 4-0:1.0: USB hub found > <6>hub 4-0:1.0: 6 ports detected > <6>usb usb5: configuration #1 chosen from 1 choice > <6>hub 5-0:1.0: USB hub found > <6>hub 5-0:1.0: 2 ports detected > <3>usb 1-1: device not accepting address 2, error -62 > <6>usb 5-2: new full speed USB device using uhci_hcd and address 2 > <6>usb usb6: configuration #1 chosen from 1 choice > <6>hub 6-0:1.0: USB hub found > <6>hub 6-0:1.0: 4 ports detected > <6>usb usb7: configuration #1 chosen from 1 choice > <6>hub 7-0:1.0: USB hub found > <6>hub 7-0:1.0: 2 ports detected > <6>usb 1-1: new low speed USB device using ohci_hcd and address 4 > <6>usb 1-1: configuration #1 chosen from 1 choice > <6>usb 2-1: new full speed USB device using ohci_hcd and address 2 > <6>usb 2-1: configuration #1 chosen from 1 choice > <6>usb 6-2: new high speed USB device using ehci_hcd and address 2 > <6>usb 6-2: configuration #1 chosen from 1 choice > <6>hub 6-2:1.0: USB hub found > <6>hub 6-2:1.0: 2 ports detected > <6>usbcore: registered new interface driver hiddev > <6>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1 > <6>usbcore: registered new interface driver usbhid > <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > <7>usb-storage: device found at 2 > <7>usb-storage: waiting for device to settle before scanning > <6>usb 6-2.1: new high speed USB device using ehci_hcd and address 3 > <6>usb 6-2.1: configuration #1 chosen from 1 choice > <6>hub 6-2.1:1.0: USB hub found > <6>hub 6-2.1:1.0: 4 ports detected > <6>usb 6-2.1.1: new high speed USB device using ehci_hcd and address 4 > <6>usb 6-2.1.1: configuration #1 chosen from 1 choice > <7>usb-storage: device found at 4 > <7>usb-storage: waiting for device to settle before scanning > <6>usbcore: registered new interface driver usb-storage > <7>usb-storage: device scan complete > <7>usb-storage: device scan complete > > 2.6.22 boot.msg extract ( hub/usb ) > > <6>usbcore: registered new interface driver usbfs > <6>usbcore: registered new interface driver hub > <6>usbcore: registered new device driver usb > <6>usb usb1: configuration #1 chosen from 1 choice > <6>hub 1-0:1.0: USB hub found > <6>hub 1-0:1.0: 2 ports detected > <6>usb usb2: configuration #1 chosen from 1 choice > <6>hub 2-0:1.0: USB hub found > <6>hub 2-0:1.0: 2 ports detected > <6>usb 1-1: new low speed USB device using ohci_hcd and address 2 > <6>usb usb3: configuration #1 chosen from 1 choice > <6>hub 3-0:1.0: USB hub found > <6>hub 3-0:1.0: 2 ports detected > <6>usb 1-1: configuration #1 chosen from 1 choice > <6>usb usb4: configuration #1 chosen from 1 choice > <6>hub 4-0:1.0: USB hub found > <6>hub 4-0:1.0: 6 ports detected > <6>usb 1-1: USB disconnect, address 2 > <6>usb usb5: configuration #1 chosen from 1 choice > <6>hub 5-0:1.0: USB hub found > <6>hub 5-0:1.0: 4 ports detected > <6>usb usb6: configuration #1 chosen from 1 choice > <6>hub 6-0:1.0: USB hub found > <6>hub 6-0:1.0: 2 ports detected > <6>usb usb7: configuration #1 chosen from 1 choice > <6>hub 7-0:1.0: USB hub found > <6>hub 7-0:1.0: 2 ports detected > <6>usb 5-2: new high speed USB device using ehci_hcd and address 2 > <6>usb 5-2: configuration #1 chosen from 1 choice > <6>hub 5-2:1.0: USB hub found > <6>hub 5-2:1.0: 2 ports detected > <6>usb 1-1: new low speed USB device using ohci_hcd and address 3 > <6>usb 1-1: configuration #1 chosen from 1 choice > <6>usbcore: registered new interface driver hiddev > <6>usb 2-1: new full speed USB device using ohci_hcd and address 2 > <6>usb 2-1: configuration #1 chosen from 1 choice > <6>usb 5-2.1: new high speed USB device using ehci_hcd and address 3 > <6>usb 5-2.1: configuration #1 chosen from 1 choice > <6>hub 5-2.1:1.0: USB hub found > <6>hub 5-2.1:1.0: 4 ports detected > <6>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1 > <7>usb-storage: device found at 2 > <7>usb-storage: waiting for device to settle before scanning > <6>usb 5-2.1.1: new high speed USB device using ehci_hcd and address 4 > <6>usb 5-2.1.1: configuration #1 chosen from 1 choice > <6>usbcore: registered new interface driver usbhid > <7>usb-storage: device found at 4 > <7>usb-storage: waiting for device to settle before scanning > <6>usbcore: registered new interface driver usb-storage > <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > <7>usb-storage: device scan complete > <7>usb-storage: device scan complete > > [system info snipped ] > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/