From: Icenowy Zheng <icen...@aosc.io>
The thermal sensor in Allwinner H5 has 2 sensors, and they have a
special segmented temperature calculation formula.
Add support for this thermal sensor.
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
drivers/thermal/sun8i_thermal.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index a761e2afda08..78a888d85cba 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -99,6 +99,16 @@ static int sun8i_ths_reg2temp(struct ths_device *tmdev,
return (reg + tmdev->chip->offset) * tmdev->chip->scale;
}
+static int sun50i_h5_calc_temp(int id, int reg)
+{
+ if (reg >= 0x500)
+ return -1191 * reg / 10 + 223000;
+ else if (!id)
+ return -1452 * reg / 10 + 259000;
+ else
+ return -1590 * reg / 10 + 276000;
+}
+
static int sun8i_ths_get_temp(void *data, int *temp)
{
struct tsensor *s = data;
@@ -530,6 +540,16 @@ static const struct ths_thermal_chip sun50i_a64_ths = {
.irq_ack = sun8i_h3_irq_ack,
};
+static const struct ths_thermal_chip sun50i_h5_ths = {
+ .sensor_num = 2,
+ .has_mod_clk = true,
+ .temp_data_base = SUN8I_THS_TEMP_DATA,
+ .calibrate = sun8i_h3_ths_calibrate,
+ .init = sun8i_h3_thermal_init,
+ .irq_ack = sun8i_h3_irq_ack,
+ .calc_temp = sun50i_h5_calc_temp,
+};
+
static const struct ths_thermal_chip sun50i_h6_ths = {
.sensor_num = 2,
.offset = -2794,
@@ -544,6 +564,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
static const struct of_device_id of_ths_match[] = {
{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
{ .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
+ { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
{ /* sentinel */ },
};
--
2.17.1
