From: Srinivas Neeli <[email protected]> While calculating bitrate for the data phase, the driver is using phase segment 1 of the arbitration phase instead of the data phase.
Signed-off-by: Srinivas Neeli <[email protected]> Acked-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- drivers/net/can/xilinx_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 4cb8c1c9..ab26691 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -425,7 +425,7 @@ static int xcan_set_bittiming(struct net_device *ndev) btr0 = dbt->brp - 1; /* Setting Time Segment 1 in BTR Register */ - btr1 = dbt->prop_seg + bt->phase_seg1 - 1; + btr1 = dbt->prop_seg + dbt->phase_seg1 - 1; /* Setting Time Segment 2 in BTR Register */ btr1 |= (dbt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift; -- 2.7.4
