According to ACT8945A datasheet[1], operating modes for ldos are controlled by BIT(5) of their respective _CTRL registers.
[1] https://active-semi.com/wp-content/uploads/ACT8945A_Datasheet.pdf Fixes: 7482d6ecc68e ("regulator: act8945a-regulator: Implement PM functionalities") Signed-off-by: Raag Jadav <[email protected]> --- drivers/regulator/act8945a-regulator.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c index 5842849..d2f804d 100644 --- a/drivers/regulator/act8945a-regulator.c +++ b/drivers/regulator/act8945a-regulator.c @@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) reg = ACT8945A_DCDC3_CTRL; break; case ACT8945A_ID_LDO1: - reg = ACT8945A_LDO1_SUS; + reg = ACT8945A_LDO1_CTRL; break; case ACT8945A_ID_LDO2: - reg = ACT8945A_LDO2_SUS; + reg = ACT8945A_LDO2_CTRL; break; case ACT8945A_ID_LDO3: - reg = ACT8945A_LDO3_SUS; + reg = ACT8945A_LDO3_CTRL; break; case ACT8945A_ID_LDO4: - reg = ACT8945A_LDO4_SUS; + reg = ACT8945A_LDO4_CTRL; break; default: return -EINVAL; -- 2.7.4
