[PATCH 08/22] arm64: dts: qcom: pm8150: Add vadc node

[Vinod Koul]

PM8150 PMIC contains vadc device so add node for this.

Signed-off-by: Vinod Koul <vk...@kernel.org>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi 
b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 2cb727ce30eb..a137def0e26a 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
 
 &spmi_bus {
        pm8150_0: pm8150@0 {
@@ -25,6 +26,33 @@
                        };
                };
 
+               pm8150_adc: adc@3100 {
+                       compatible = "qcom,spmi-adc5";
+                       reg = <0x3100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #io-channel-cells = <1>;
+                       interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+                       ref-gnd@0 {
+                               reg = <ADC5_REF_GND>;
+                               qcom,pre-scaling = <1 1>;
+                               label = "ref_gnd";
+                       };
+
+                       vref-1p25@1 {
+                               reg = <ADC5_1P25VREF>;
+                               qcom,pre-scaling = <1 1>;
+                               label = "vref_1p25";
+                       };
+
+                       die-temp@6 {
+                               reg = <ADC5_DIE_TEMP>;
+                               qcom,pre-scaling = <1 1>;
+                               label = "die_temp";
+                       };
+               };
+
                rtc@6000 {
                        compatible = "qcom,pm8941-rtc";
                        reg = <0x6000>;
-- 
2.20.1