From: Marco Hartmann Sent: Tuesday, August 20, 2019 1:11 AM
> IEEE 802.3ae clause 45 defines a modified MDIO protocol that uses a two
> staged access model in order to increase the address space.
>
> This patch adds support for C45 MDIO read and write accesses, which are
> used whenever the MII_ADDR_C45 flag in the regnum argument is set.
> In case it is not set, C22 accesses are used as before.
>
> Co-developed-by: Christian Herber <christian.her...@nxp.com>
> Signed-off-by: Christian Herber <christian.her...@nxp.com>
> Signed-off-by: Marco Hartmann <marco.hartm...@nxp.com>
> ---
> drivers/net/ethernet/freescale/fec_main.c | 65
> ++++++++++++++++++++++++++++---
> 1 file changed, 59 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index c01d3ec3e9af..73f8f9a149a1 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -208,8 +208,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet
> MAC address");
>
> /* FEC MII MMFR bits definition */
> #define FEC_MMFR_ST (1 << 30)
> +#define FEC_MMFR_ST_C45 (0)
> #define FEC_MMFR_OP_READ (2 << 28)
> +#define FEC_MMFR_OP_READ_C45 (3 << 28)
> #define FEC_MMFR_OP_WRITE (1 << 28)
> +#define FEC_MMFR_OP_ADDR_WRITE (0)
> #define FEC_MMFR_PA(v) ((v & 0x1f) << 23)
> #define FEC_MMFR_RA(v) ((v & 0x1f) << 18)
> #define FEC_MMFR_TA (2 << 16)
> @@ -1767,7 +1770,7 @@ static int fec_enet_mdio_read(struct mii_bus *bus,
> int mii_id, int regnum)
> struct fec_enet_private *fep = bus->priv;
> struct device *dev = &fep->pdev->dev;
> unsigned long time_left;
> - int ret = 0;
> + int ret = 0, frame_start, frame_addr, frame_op;
Add bool variable:
bool is_c45 = !!(regnum & MII_ADDR_C45);
>
> ret = pm_runtime_get_sync(dev);
> if (ret < 0)
> @@ -1775,9 +1778,36 @@ static int fec_enet_mdio_read(struct mii_bus
> *bus, int mii_id, int regnum)
>
> reinit_completion(&fep->mdio_done);
>
> + if (MII_ADDR_C45 & regnum) {
if (is_c45)
> + frame_start = FEC_MMFR_ST_C45;
> +
> + /* write address */
> + frame_addr = (regnum >> 16);
> + writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> + FEC_MMFR_TA | (regnum & 0xFFFF),
> + fep->hwp + FEC_MII_DATA);
> +
> + /* wait for end of transfer */
> + time_left = wait_for_completion_timeout(&fep->mdio_done,
> + usecs_to_jiffies(FEC_MII_TIMEOUT));
> + if (time_left == 0) {
> + netdev_err(fep->netdev, "MDIO address write timeout\n");
> + ret = -ETIMEDOUT;
Should be:
goto out;
> + }
> +
> + frame_op = FEC_MMFR_OP_READ_C45;
> +
> + } else {
> + /* C22 read */
> + frame_op = FEC_MMFR_OP_READ;
> + frame_start = FEC_MMFR_ST;
> + frame_addr = regnum;
> + }
> +
> /* start a read op */
> - writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
> - FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
> + writel(frame_start | frame_op |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
>
> /* wait for end of transfer */
> @@ -1804,7 +1834,7 @@ static int fec_enet_mdio_write(struct mii_bus *bus,
> int mii_id, int regnum,
> struct fec_enet_private *fep = bus->priv;
> struct device *dev = &fep->pdev->dev;
> unsigned long time_left;
> - int ret;
> + int ret, frame_start, frame_addr;
>
> ret = pm_runtime_get_sync(dev);
> if (ret < 0)
> @@ -1814,9 +1844,32 @@ static int fec_enet_mdio_write(struct mii_bus
> *bus, int mii_id, int regnum,
bool is_c45 = !!(regnum & MII_ADDR_C45);
>
> reinit_completion(&fep->mdio_done);
>
> + if (MII_ADDR_C45 & regnum) {
if (!is_c45) {
> + frame_start = FEC_MMFR_ST_C45;
> +
> + /* write address */
> + frame_addr = (regnum >> 16);
> + writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> + FEC_MMFR_TA | (regnum & 0xFFFF),
> + fep->hwp + FEC_MII_DATA);
> +
> + /* wait for end of transfer */
> + time_left = wait_for_completion_timeout(&fep->mdio_done,
> + usecs_to_jiffies(FEC_MII_TIMEOUT));
> + if (time_left == 0) {
> + netdev_err(fep->netdev, "MDIO address write timeout\n");
> + ret = -ETIMEDOUT;
Like mdio read, it should be:
goto out;
> + }
> + } else {
> + /* C22 write */
> + frame_start = FEC_MMFR_ST;
> + frame_addr = regnum;
> + }
> +
> /* start a write op */
> - writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
> - FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
> + writel(frame_start | FEC_MMFR_OP_WRITE |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> FEC_MMFR_TA | FEC_MMFR_DATA(value),
> fep->hwp + FEC_MII_DATA);
>
> --
> 2.7.4
