On 8/20/19 11:21 PM, Donald Buczek wrote:
Dear Linux folks,
I'm investigating a problem, that the crash utility fails to work with our
crash dumps:
buczek@kreios:/mnt$ crash vmlinux crash.vmcore
crash 7.2.6
Copyright (C) 2002-2019 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
Copyright (C) 1999-2006 Hewlett-Packard Co
Copyright (C) 2005, 2006, 2011, 2012 Fujitsu Limited
Copyright (C) 2006, 2007 VA Linux Systems Japan K.K.
Copyright (C) 2005, 2011 NEC Corporation
Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc.
Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc.
This program is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. Enter "help copying" to see the conditions.
This program has absolutely no warranty. Enter "help warranty" for
details.
GNU gdb (GDB) 7.6
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu"...
crash: read error: kernel virtual address: ffff89807ff77000 type: "memory
section root table"
The crash file is a copy of /dev/vmcore taken by a crashkernel after a
sysctl-forced panic.
It looks to me, that 0xffff89807ff77000 is not readable, because the virtual
addresses stored in the elf header of the dump file are off by
0x0000008000000000:
buczek@kreios:/mnt$ readelf -a crash.vmcore | grep LOAD | perl -lane 'printf
"%s (%016x)\n",$_,hex($F[2])-hex($F[3])'
LOAD 0x000000000000d000 0xffffffff81000000 0x000001007d000000
(fffffeff04000000)
LOAD 0x0000000001c33000 0xffff880000001000 0x0000000000001000
(ffff880000000000)
LOAD 0x0000000001cc1000 0xffff880000090000 0x0000000000090000
(ffff880000000000)
LOAD 0x0000000001cd1000 0xffff880000100000 0x0000000000100000
(ffff880000000000)
LOAD 0x0000000001cd2070 0xffff880000100070 0x0000000000100070
(ffff880000000000)
LOAD 0x0000000019bd2000 0xffff880038000000 0x0000000038000000
(ffff880000000000)
LOAD 0x000000004e6a1000 0xffff88006ffff000 0x000000006ffff000
(ffff880000000000)
LOAD 0x000000004e6a2000 0xffff880100000000 0x0000000100000000
(ffff880000000000)
LOAD 0x0000001fcda22000 0xffff882080000000 0x0000002080000000
(ffff880000000000)
LOAD 0x0000003fcd9a2000 0xffff884080000000 0x0000004080000000
(ffff880000000000)
LOAD 0x0000005fcd922000 0xffff886080000000 0x0000006080000000
(ffff880000000000)
LOAD 0x0000007fcd8a2000 0xffff888080000000 0x0000008080000000
(ffff880000000000)
LOAD 0x0000009fcd822000 0xffff88a080000000 0x000000a080000000
(ffff880000000000)
LOAD 0x000000bfcd7a2000 0xffff88c080000000 0x000000c080000000
(ffff880000000000)
LOAD 0x000000dfcd722000 0xffff88e080000000 0x000000e080000000
(ffff880000000000)
LOAD 0x000000fc4d722000 0xffff88fe00000000 0x000000fe00000000
(ffff880000000000)
(Columns are File offset, Virtual Address, Physical Address and computed
offset).
I would expect the offset between the virtual and the physical address to be
PAGE_OFFSET, which is 0xffff88800000000 on x86_64, not 0xffff880000000000.
Unlike /proc/vmcore, /proc/kcore shows the same physical memory (of the last
memory section above) with a correct offset:
buczek@kreios:/mnt$ sudo readelf -a /proc/kcore | grep 0x000000fe00000000 | perl
-lane 'printf "%s (%016x)\n",$_,hex($F[2])-hex($F[3])'
LOAD 0x0000097e00004000 0xffff897e00000000 0x000000fe00000000
(ffff888000000000)
The failing address 0xffff89807ff77000 happens to be at the end of the last
memory section. It is the mem_section array, which crash wants to load and
which is visible in the running system:
buczek@kreios:/mnt$ sudo gdb vmlinux /proc/kcore
[...]
(gdb) print mem_section
$1 = (struct mem_section **) 0xffff89807ff77000
(gdb) print *mem_section
$2 = (struct mem_section *) 0xffff88a07f37b000
(gdb) print **mem_section
$3 = {section_mem_map = 18446719884453740551, pageblock_flags =
0xffff88a07f36f040}
I can read the same information from the crash dump, if I account for the
0x0000008000000000 error:
buczek@kreios:/mnt$ gdb vmlinux crash.vmcore
[...]
(gdb) print mem_section
$1 = (struct mem_section **) 0xffff89807ff77000
(gdb) print *mem_section
Cannot access memory at address 0xffff89807ff77000
(gdb) set $t=(struct mem_section **) ((char *)mem_section -
0x0000008000000000)
(gdb) print *$t
$2 = (struct mem_section *) 0xffff88a07f37b000
(gdb) set $s=(struct mem_section *)((char *)*$t - 0x0000008000000000 )
(gdb) print *$s
$3 = {section_mem_map = 18446719884453740551, pageblock_flags =
0xffff88a07f36f040}
In the above example, the running kernel, the crashed kernel and the
crashkernel are all the same 4.19.57 compilation. But I've tried with several
other versions ( crashkernel 4.4, running kernel from 4.0 to linux master) with
the same result.
The machine in the above example has several numa nodes (this is why there are
so many LOAD headers). But I've tried this with a small kvm virtual machine and
got the same result.
buczek@kreios:/mnt/linux-4.19.57-286.x86_64/build$ grep RANDOMIZE_BASE
.config
# CONFIG_RANDOMIZE_BASE is not set
buczek@kreios:/mnt/linux-4.19.57-286.x86_64/build$ grep SPARSEMEM .config
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
buczek@kreios:/mnt/linux-4.19.57-286.x86_64/build$ grep
PAGE_TABLE_ISOLATION .config
CONFIG_PAGE_TABLE_ISOLATION=y
Any ideas?
Donald
To answer my own question for the records:
Our kexec command line is
/usr/sbin/kexec -p /boot/bzImage.crash --initrd=/boot/grub/initramfs.igz
--command-line="root=LABEL=root ro console=ttyS1,115200n8 console=tty0 irqpoll
nr_cpus=1 reset_devices panic=5 CRASH"
So we neither gave -s (--kexec-file-syscall) nor -a ( --kexec-syscall-auto ).
For this reason, kexec used the kexec_load() syscall instead of the newer
kexec_file_load syscall.
With kexec_load(), the elf headers for the crash, which include program header
for the old system ram, are not computed by the kernel, but by the userspace
program from kexec-tools.
Linux kernel commit d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level
paging") changed the base of the direct mapping from 0xffff880000000000 to
0xffff888000000000. This was merged into v4.20-rc2.
kexec-tools, however, still has the old address hard coded:
buczek@avaritia:/scratch/cluster/buczek/kexec-tools (master)$ git grep
X86_64_PAGE_OFFSET
kexec/arch/i386/crashdump-x86.c:
elf_info->page_offset = X86_64_PAGE_OFFSET_PRE_2_6_27;
kexec/arch/i386/crashdump-x86.c:
elf_info->page_offset = X86_64_PAGE_OFFSET;
kexec/arch/i386/crashdump-x86.h:#define X86_64_PAGE_OFFSET_PRE_2_6_27
0xffff810000000000ULL
kexec/arch/i386/crashdump-x86.h:#define X86_64_PAGE_OFFSET
0xffff880000000000ULL
Best
Donald
