Maximum MTU for XGMAC cores is 16k thus the check for presence of XGMAC
shall be done first in order to assign correct value.
Signed-off-by: Jose Abreu <joab...@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavall...@st.com>
Cc: Alexandre Torgue <alexandre.tor...@st.com>
Cc: Jose Abreu <joab...@synopsys.com>
Cc: "David S. Miller" <da...@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.st...@gmail.com>
Cc: net...@vger.kernel.org
Cc: linux-st...@st-md-mailman.stormreply.com
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5271c6129f0e..c3baca9f587b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4542,10 +4542,10 @@ int stmmac_dvr_probe(struct device *device,
/* MTU range: 46 - hw-specific max */
ndev->min_mtu = ETH_ZLEN - ETH_HLEN;
- if ((priv->plat->enh_desc) || (priv->synopsys_id >= DWMAC_CORE_4_00))
- ndev->max_mtu = JUMBO_LEN;
- else if (priv->plat->has_xgmac)
+ if (priv->plat->has_xgmac)
ndev->max_mtu = XGMAC_JUMBO_LEN;
+ else if ((priv->plat->enh_desc) || (priv->synopsys_id >=
DWMAC_CORE_4_00))
+ ndev->max_mtu = JUMBO_LEN;
else
ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
/* Will not overwrite ndev->max_mtu if plat->maxmtu > ndev->max_mtu
--
2.7.4
