From: Stanislaw Gruszka <sgrus...@redhat.com>
commit 8f2d163cb26da87e7d8e1677368b8ba1ba4d30b3 upstream.
On some machines mt76x0u firmware can hung during resume,
what result on messages like below:
[ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71
[ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[ 477.825029] usb 1-8: USB disconnect, device number 6
and possible whole system freeze.
This can be avoided, if we do not perform mt76x0_chip_onoff() reset.
Cc: sta...@vger.kernel.org
Fixes: 134b2d0d1fcf ("mt76x0: init files")
Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com>
Signed-off-by: Kalle Valo <kv...@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
@@ -136,11 +136,11 @@ static const struct ieee80211_ops mt76x0
.release_buffered_frames = mt76_release_buffered_frames,
};
-static int mt76x0u_init_hardware(struct mt76x02_dev *dev)
+static int mt76x0u_init_hardware(struct mt76x02_dev *dev, bool reset)
{
int err;
- mt76x0_chip_onoff(dev, true, true);
+ mt76x0_chip_onoff(dev, true, reset);
if (!mt76x02_wait_for_mac(&dev->mt76))
return -ETIMEDOUT;
@@ -173,7 +173,7 @@ static int mt76x0u_register_device(struc
if (err < 0)
goto out_err;
- err = mt76x0u_init_hardware(dev);
+ err = mt76x0u_init_hardware(dev, true);
if (err < 0)
goto out_err;
@@ -309,7 +309,7 @@ static int __maybe_unused mt76x0_resume(
if (ret < 0)
goto err;
- ret = mt76x0u_init_hardware(dev);
+ ret = mt76x0u_init_hardware(dev, false);
if (ret)
goto err;
