Add the board's pmic (rk809) and hook up the real supplies to their consumers. This is especially important as cpufreq would otherwise hang the system when scaling the frequency without adjusting the voltage.
Signed-off-by: Heiko Stuebner <[email protected]> --- arch/arm64/boot/dts/rockchip/px30-evb.dts | 254 +++++++++++++++++++++- 1 file changed, 246 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 6eb7407a84aa..d78fb172a66f 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -58,6 +58,7 @@ backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 25000 0>; + power-supply = <&vcc3v3_lcd>; }; sdio_pwrseq: sdio-pwrseq { @@ -74,13 +75,6 @@ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ }; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - vcc5v0_sys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -91,6 +85,22 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &display_subsystem { status = "okay"; }; @@ -100,12 +110,14 @@ cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; + vmmc-supply = <&vcc_3v0>; + vqmmc-supply = <&vccio_flash>; status = "okay"; }; &gmac { clock_in_out = "output"; - phy-supply = <&vcc_phy>; + phy-supply = <&vcc_rmii>; snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 50000 50000>; @@ -114,6 +126,219 @@ &i2c0 { status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + clock-output-names = "xin32k"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: vcc_rmii: DCDC_REG4 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc2v8_dvp: LDO_REG7 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v5_dvp: LDO_REG9 { + regulator-name = "vcc1v5_dvp"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc3v3_lcd: SWITCH_REG1 { + regulator-name = "vcc3v3_lcd"; + regulator-boot-on; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; &i2s1_2ch { @@ -122,6 +347,13 @@ &io_domains { status = "okay"; + + vccio1-supply = <&vccio_sdio>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc3v0_pmu>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vccio_flash>; }; &pinctrl { @@ -164,6 +396,9 @@ &pmu_io_domains { status = "okay"; + + pmuio1-supply = <&vcc3v0_pmu>; + pmuio2-supply = <&vcc3v0_pmu>; }; &pwm1 { @@ -171,6 +406,7 @@ }; &saradc { + vref-supply = <&vcc_1v8>; status = "okay"; }; @@ -183,6 +419,8 @@ sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; -- 2.20.1
