On 18-09-19, 17:08, Marc Gonzalez wrote:
> On 06/09/2019 07:10, Vinod Koul wrote:
> > + QMP_PHY_INIT_CFG(QSERDES_COM_V4_LOCK_CMP2_MODE1, 0x0f),
> > + QMP_PHY_INIT_CFG(QSERDES_COM_V4_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> > + QMP_PHY_INIT_CFG(QSERDES_COM_V4_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> > +
> > + /* Rate B */
> > + QMP_PHY_INIT_CFG(QSERDES_COM_V4_VCO_TUNE_MAP, 0x06),
>
> IMO, the name of the symbolic constants should be QSERDES_V4_COM*
> (like below for QSERDES_V4_TX* and QSERDES_V4_RX*)
Agreed this should have been QSERDES_V4_COM_*
> > +static const char * const sm8150_ufs_phy_clk_l[] = {
> > + "ref", "ref_aux",
> > +};
> > +
>
> Why not just reuse sdm845_ufs_phy_clk_l?
I think that is a good idea, will do
> > +static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> > + .type = PHY_TYPE_UFS,
> > + .nlanes = 2,
> > +
> > + .serdes_tbl = sm8150_ufsphy_serdes_tbl,
> > + .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> > + .tx_tbl = sm8150_ufsphy_tx_tbl,
> > + .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
> > + .rx_tbl = sm8150_ufsphy_rx_tbl,
> > + .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
> > + .pcs_tbl = sm8150_ufsphy_pcs_tbl,
> > + .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
> > + .clk_list = sm8150_ufs_phy_clk_l,
> > + .num_clks = ARRAY_SIZE(sm8150_ufs_phy_clk_l),
> > + .vreg_list = qmp_phy_vreg_l,
> > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> > + .regs = sm8150_ufsphy_regs_layout,
> > +
> > + .start_ctrl = SERDES_START,
> > + .pwrdn_ctrl = SW_PWRDN,
> > + .mask_pcs_ready = PCS_READY,
>
> I think you need to rework your patch on top of
> "phy: qcom-qmp: Correct ready status, again"
> (it removed this field)
Yes will rebase on rc1 (when out) and resend, thanks for pointing
--
~Vinod
