From: Greg Kroah-Hartman <[email protected]>

This reverts commit c890a458e27210d1a749a18941047a9e4209fa93 which is
commit e4849aff1e169b86c561738daf8ff020e9de1011 upstream

Guenter writes:
        Upstream commit e4849aff1e16 ("MIPS: SiByte: Enable swiotlb for SWARM,
        LittleSur and BigSur") results in build failures in v4.4.y and v4.14.y.

        make bigsur_defconfig:

        warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && 
SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies 
(CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || 
NLM_XLR_BOARD)
        warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && 
SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies 
(CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || 
NLM_XLR_BOARD)

        and the actual build:

        lib/swiotlb.o: In function `swiotlb_tbl_map_single':
        (.text+0x1c0): undefined reference to `iommu_is_span_boundary'
        Makefile:1021: recipe for target 'vmlinux' failed

Reported-by: Guenter Roeck <[email protected]>
Cc: Maciej W. Rozycki <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 arch/mips/Kconfig                |    3 ---
 arch/mips/sibyte/common/Makefile |    1 -
 arch/mips/sibyte/common/dma.c    |   14 --------------
 3 files changed, 18 deletions(-)
 delete mode 100644 arch/mips/sibyte/common/dma.c

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -761,7 +761,6 @@ config SIBYTE_SWARM
        select SYS_SUPPORTS_HIGHMEM
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select ZONE_DMA32 if 64BIT
-       select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_LITTLESUR
        bool "Sibyte BCM91250C2-LittleSur"
@@ -784,7 +783,6 @@ config SIBYTE_SENTOSA
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_BIGSUR
        bool "Sibyte BCM91480B-BigSur"
@@ -798,7 +796,6 @@ config SIBYTE_BIGSUR
        select SYS_SUPPORTS_HIGHMEM
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select ZONE_DMA32 if 64BIT
-       select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SNI_RM
        bool "SNI RM200/300/400"
--- a/arch/mips/sibyte/common/Makefile
+++ b/arch/mips/sibyte/common/Makefile
@@ -1,5 +1,4 @@
 obj-y := cfe.o
-obj-$(CONFIG_SWIOTLB)                  += dma.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)       += bus_watcher.o
 obj-$(CONFIG_SIBYTE_CFE_CONSOLE)       += cfe_console.o
 obj-$(CONFIG_SIBYTE_TBPROF)            += sb_tbprof.o
--- a/arch/mips/sibyte/common/dma.c
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *     DMA support for Broadcom SiByte platforms.
- *
- *     Copyright (c) 2018  Maciej W. Rozycki
- */
-
-#include <linux/swiotlb.h>
-#include <asm/bootinfo.h>
-
-void __init plat_swiotlb_setup(void)
-{
-       swiotlb_init(1);
-}


Reply via email to