[PATCH v4 05/15] arm: dts: msm8974: thermal: Add thermal zones for each sensor

[Amit Kucheria]

msm8974 has 11 sensors connected to a single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.

Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
Tested-by: Brian Masney <masn...@onstation.org>
Reviewed-by: Stephen Boyd <swb...@chromium.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 90 +++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi 
b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 369e58f64145..d32f639505f1 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -217,6 +217,96 @@
                                };
                        };
                };
+
+               q6-dsp-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 1>;
+
+                       trips {
+                               q6_dsp_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               modemtx-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 2>;
+
+                       trips {
+                               modemtx_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               video-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 3>;
+
+                       trips {
+                               video_alert0: trip-point0 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               wlan-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+
+                       thermal-sensors = <&tsens 4>;
+
+                       trips {
+                               wlan_alert0: trip-point0 {
+                                       temperature = <105000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               gpu-thermal-top {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 9>;
+
+                       trips {
+                               gpu1_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               gpu-thermal-bottom {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 10>;
+
+                       trips {
+                               gpu2_alert0: trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
        };
 
        cpu-pmu {
-- 
2.17.1