From: Martin Blumenstingl <[email protected]> [ Upstream commit ed90302be64a53d9031c8ce05428c358b16a5d96 ]
The mainline PCIe PHY driver has it's own devicetree node. Update the clock alias so the mainline driver finds the clocks. The first PCIe PHY is located at 0x1f106800 and exists on VRX200, ARX300 and GRX390. The second PCIe PHY is located at 0x1f700400 and exists on ARX300 and GRX390. The third PCIe PHY is located at 0x1f106a00 and exists onl on GRX390. Lantiq's board support package (called "UGW") names these registers "PDI". Signed-off-by: Martin Blumenstingl <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sasha Levin <[email protected]> --- arch/mips/lantiq/xway/sysctrl.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index b4323b2214e20..156a95ac5c725 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -468,14 +468,14 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P); clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P); /* rc 0 */ - clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P); + clkdev_add_pmu("1f106800.phy", "phy", 1, 2, PMU_ANALOG_PCIE0_P); clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); - clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI); + clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI); clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); /* rc 1 */ - clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P); + clkdev_add_pmu("1f700400.phy", "phy", 1, 2, PMU_ANALOG_PCIE1_P); clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI); - clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI); + clkdev_add_pmu("1f700400.phy", "pdi", 1, 1, PMU1_PCIE1_PDI); clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL); } @@ -499,9 +499,9 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); /* rc 2 */ - clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P); + clkdev_add_pmu("1f106a00.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P); clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); - clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); + clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); @@ -526,10 +526,10 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM); clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P); clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM); - clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY); + clkdev_add_pmu("1f106800.phy", "phy", 1, 1, PMU1_PCIE_PHY); clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK); clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); - clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI); + clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI); clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); -- 2.20.1
